Technicolor - Thomson 5400LDK Intercom routing switch, Headset Production vol. control selection

Intercom
1			2
				3
	Eng	Front	Prod	4
	Off
		Rear
	Prod
	Ext	Loc	Progr
	Mix
				5
CVBS (Option)		Call	Eng
				6
		Mic
VF	Ext
Front Rear 48V
Scrip
Light
Breaker		Dc in
Power on				7

1Intercom routing switch

A 3-position switch that routes the camera operator intercom microphone signal to engineering (ENG) or production (PROD), or turns off the intercom. The momentary VTR switch at the front of the camera, or on the lens can be used to route the cameraman's intercom microphone signal to production, regardless of the position of this switch.

2Headset Production vol. control selection

A 2-position switch for the production intercom which selects control of the volume at the front of the camera 7 or control of the volume at the rear 3 .

3Headset Production volume control

This control varies the volume of the production intercom signal to the camera operator's headset when the selection switch 2 is in the REAR position.

4Headset Programme volume control

This control varies the volume of the programme intercom signal to the cameraman's headset.

5Headset Engineering volume control

This control varies the volume of the engineering intercom signal to the cameraman's headset.

6Cameraman intercom connector

Headsets with dynamic or electrete type microphones can be connected to this socket.

7Headset Production volume control

This control varies the volume of the production intercom signal to the camera operator's headset when the selection switch 2 is in the FRONT position.

4-12 Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series Location of Controls and Functions