Technicolor - Thomson 5400LDK manual Systems Menu, Entering the Systems menu, Finding your way

Page 49

Systems Menu

The system functions of the camera are grouped into menus and sub-menus. The systems menu is viewed in the viewfinder and navigated by means of the Rotary control and the Select button which are both located at the front of the camera.

Entering the Systems menu

Press the Select button after the camera is switched on, the message Menu off appears in the viewfinder. Press the Select button again while this text is showing, the MAIN menu appears in the viewfinder.

Menu off

exec

VF

 

Lens

 

Video

 

Install

 

MENU: MAIN

 

Files

 

Security

 

Diagnostics

 

Service

 

The MAIN menu screen shows five items. The name of the menu is shown below these. Four more items are hidden but become visible when you scroll down using the rotary control.

(Some of these items may not appear if the user level is not set to 3.)

A cursor shows your position in the menu. The Rotary control moves the cursor up and down.

Finding your way

Use the Rotary control to move the cursor through the menu items. If a double arrow (>>) is visible, then pressing the Select button brings you one level lower in the menu system. Only five items are visible in each menu. Scroll up or down to see any additional items.

When you first enter a menu (other than the MAIN menu) the cursor is positioned next to the first item.

The TOP and PREVIOUS entries are not immediately visible but are located above the first item. Use the Rotary control to scroll up to them.

-Select TOP to bring you back to the MAIN menu.

-Select PREVIOUS to go back to the menu that you were in before the current one.

TOP

 

PREVIOUS

 

Lens type

Std

Auto Iris

On

Peak/Average

65

Auto iris setp.

35

Mom. iris setp.

50

MENU: LENS

 

Extended Iris

 

The LENS menu above shows the items displayed when you first enter the menu and the other items that are available by scrolling up or down with the Rotary control.

Leaving the Systems Menu

If you are deep within the menu structure, follow these steps to leave:

a.If necessary move the cursor to the leftmost column with the Select button.

b.Scroll upwards with the Rotary control until the cursor points to TOP (this is the MAIN menu).

c.Press the Select button. The cursor now points to the Menu off item of the MAIN menu.

d.Press the Select button to leave the System menu.

This is the recommended way of leaving the System menu.

If you do not use the menu it disappears after a few seconds. (This delay can be programmed in the VF menu.) However, when you press the Select button again you enter the System menu at the last position of the cursor and not at the top of MAIN menu.

To prevent confusion the next time you enter the System menu, it is advisable to leave the System menu by returning to the MAIN menu (TOP) and selecting Menu off.

Operating the Menu System

Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series

6-3

Image 49
Contents Operator’s Manual Declaration of Conformity LDK 100 Triax Multi-role Camera Operators Manual Contents Purpose of this manual About this ManualIntended audience Structure of this manualSection Introduction Technology Smart Card Access controlScene files Operator filesFeatures FCC Class a Statement Important PrecautionsPage Section Assembling the Units Transport Case Lens Mounting the 1.5-inch viewfinder and microphone holder Inch ViewfinderRight eye adapter Positioning the 1.5-inch viewfinderWide angle eyepiece Left eye adapter Inch Viewfinder AccessoriesZoom Controls Other ViewfindersMicrophone Tripod Adapter Plate SuperXPander Local Control PanelRain and Off-use Cover Shoulder PadTop Light Script boardSection Configurations OCP Basic ConfigurationsSection Location of Controls and Functions Power on indicator Power SupplyCircuit breaker button Breaker Input voltage must not exceed 17 Vdc Triax cable socketSmart card slot Security and AccessVideo Functions Black Stretch switchColour Bars switch Bars Colour Temperature selector White BalGain selection switch Clean Scan buttonVTR Start button Vertical Shift switch V-ShiftStd File button Monitoring Functions Tally switch Tally indicators red Viewfinder Viewfinder Indicators Audio Audio microphone connector rearHeadset Production volume control Intercom routing switchHeadset Programme volume control Headset Engineering volume controlSystem Menu Select switch Lens Video Install Files Security Diagnostics ServiceControl Functions System Menu Rotary controlAuxilary Functions Script Light connectorCall button Section Shooting Using the Camera Smart-Touch Standard settingsGain selection Colour BarAuto-White Balance Colour temperature selectionShooting Screens Clean ScanCRT Exposure FT Exposure Time EVR Enhanced Vertical Resolution ITPage Section Using the Menu System System Menu On/Off Rotary Control Selection button Entering the Systems menu Systems MenuFinding your way Leaving the Systems MenuUndoing changes Making changesMenu Structure User Levels Security Menu for Owners AccessRun Hours PIN CodeInstall Menu Features Files Menu FeaturesAppendix Contents Appendix Main Menu System Menu StructureVF Menu Lens Menu Video Menu Knee GainGamma MatrixShading Install Menu LDK 5411 Betacam Adapter Intercom Install Menu LDK 5400 Triax AdapterAudio Install Menu LDK 5430 Triax Adapter Tracker Channel TP/Aux videoProg Channel Files Menu Security Menu Installed LevelCustomer files Green ButtonDiagnostics Menu Service Menu Function Path in Menu List of System Menu FunctionsMCP Abbreviation Meaning List of AbbreviationsOperators Manual LDK 5400 Camerahead Software Status