Control Functions
2 |
1 |
The system menus are displayed in the viewfinder. There are two controls at the front of the camera that allow you to navigate through these menus.
The functions handled by the system menus are divided into eight different menus that are listed in the main menu as follows:
VF | >> |
Lens>>
Video>>
Install>>
Files>>
Security>>
Diagnostics>>
Service>>
(Some of these items may not appear if the user level is not set to 3.)
Each of these menus gives you access to a particular group of functions.
1System Menu Rotary control
This rotary control is used to move through the various menus of the control system. It is also used to vary the value of some functions.
2System Menu Select switch
This switch, when pressed, selects the particular menu that is pointed out by the cursor in the viewfinder menu display. It is also used to set an on/off function or to select a value from a list.
More information on using the system menus is contained in Section 6.
Location of Controls and Functions | Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series |