Monitoring Functions
1
2
3
Eng Front
Off
Prod Rear
Ext Loc
Mix
Call
CVBS (Option)
Mic
VF Ext
Front Rear 48V
Scrip
Light
Breaker | Dc in |
Power on
Eng Progr Prod
5
4
1CVBS output connector
This BNC connector provides a 1Vpp CVBS output signal when the optional encoder (LDK 5405/00 for PAL or LDK 5405/50 for NTSC) is fitted.
2Viewfinder / External video output connector
This BNC connector carries the viewfinder signal or the external video signal from the Base Station depending on the positon of switch 3 .
3Video output selection switch
This switch determines whether the viewfinder signal from the camera or the external video signal from the Base Station is available at connector 2 .
4Viewfinder selection switch
This switch is used to select the camera Y signal or an external signal (set with 5 ) for display in the viewfinder. The Ret. button on the lens also selects this signal in parallel with this switch.
5External signal selection switch
This switch selects the signal displayed in the viewfinder when the viewfinder signal selection switch
4is in the EXT position. The signal displayed is as follows:
EXT | : | Base Station external input 1. |
MIX | : | Base Station external input 1 and |
|
| camera Y signal mixed. |
|
| Note |
Switches 4 | and 5 are disabled when the |
SuperXPander is used.
Location of Controls and Functions | Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series |