JAI CV-M50IR operation manual 126.02, External Appearance

Page 20

CV-M50IR

9. External Appearance			(0.52)	(150.97)
	(150.97)			4-M3
		26.02)		(380.15)
		(1		(380.15)
40.57)		C-MOUNT	(05.2)	(150.97)
(1		20.79)
		(0

Unit : mm (inches)

(012..5)7	VIDEO	SW1	TRIGGER
		GAIN	DCIN
			/SYNC

(126.02)

- 19 -

Image 20

Contents CV-M50IR Declaration of Conformity Table of Contents Standard Composition Main Features GeneralLocations and Functions Pin Assignment Pin Multi-connector DC-IN/SYNCPin Multi-connector Trigger Input/Output of HD/VD Signal Normal Shutter ModeExternal Trigger Mode Functions and OperationsCV-M50 EIA Non-interlaced / Field accumulation mode Edge pre-select mode for non-interlace onlyCV-M50 Ccir Non-interlaced / Field accumulation mode Pulse Width Control ModePulse width control mode for non-interlace only Start/Stop Trigger Mode CV-M50IR Long Time Exposure Mode EIA CcirCV-M50IR Table for Shutter Time Mode SettingTable for SW 1 Setting SW2 on PK8057 Board Jumper Settings Pixel Clock OutputLocation of SW2 and Jumpers Board PK8054 Side B Board PK8057 Side aAdjustment of Video Signal Output Level 126.02 External AppearanceSpecifications Spectral SensitivityAppendix PrecautionsTypical CCD Characteristics Users Mode Settings Users Modifications DisclaimerUser’s Record Camera type CV-M50 Scanning system2700-11083E F3