JAI CV-M50IR operation manual Disclaimer, User’s Record, Camera type CV-M50 Scanning system

Page 23

CV-M50IR

12. Disclaimer

Increased dark current over time in EXview sensors. It is known that radiation damage increases the dark current of a CCD sensor. This is also true for radiation arising from natural sources, also known as background radiation.

These sources include: (1) terrestrial radiation from naturally occurring radioactive isotopes in the soil; (2) cosmic radiation originating in outer space; and (3) naturally occurring radioactive isotopes in the body.

The EXview series of CCD sensors have greatly improved responsivity, especially in the Near IR part of the spectrum. This greatly improved performance comes at the price of accelerated degradation (increased dark current) due to natural background radiation. This degradation effect is approximately 4 times as fast as in standard sensors, such as Hyper HAD sensors. The degradation effect will manifest itself as in increasing non-uniformity of pixels when viewed in the dark (white spots). This is a natural effect, and is not eligible for warranty replacement/repair of the CCD camera.

13. User’s Record

Camera type:

CV-M50

Scanning system:

EIA/CCIR

Revision:

(Revision F)

Serial No.

.................

 

 

Users Mode Settings

 

Users Modifications

This manual can be downloaded from: www.jai.com

- 22 -

Image 23
Contents CV-M50IR Declaration of Conformity Table of Contents General Standard Composition Main FeaturesLocations and Functions Pin Assignment Pin Multi-connector DC-IN/SYNCPin Multi-connector Trigger Functions and Operations Input/Output of HD/VD SignalNormal Shutter Mode External Trigger ModeEdge pre-select mode for non-interlace only CV-M50 EIA Non-interlaced / Field accumulation modePulse Width Control Mode CV-M50 Ccir Non-interlaced / Field accumulation modePulse width control mode for non-interlace only Start/Stop Trigger Mode CV-M50IR EIA Ccir Long Time Exposure ModeCV-M50IR Table for Shutter Time Mode SettingTable for SW 1 Setting SW2 on PK8057 Board Pixel Clock Output Jumper SettingsBoard PK8054 Side B Board PK8057 Side a Location of SW2 and JumpersAdjustment of Video Signal Output Level External Appearance 126.02Spectral Sensitivity SpecificationsAppendix PrecautionsTypical CCD Characteristics Camera type CV-M50 Scanning system Users Mode Settings Users ModificationsDisclaimer User’s Record2700-11083E F3