JAI CV-L105 operation manual Specifications table, Spectral Sensitivity

CV-L105

9. Specifications

9.1. Specifications table

Specifications	CV-L105
Scanning system	Line scan
Pixel clock
Line rate (scan rate)
CCD sensor
Sensing area
Effective pixels
Pixels in video output
Cell size
Prism block
CCD alignment precision	Typ. 0,5 pixel, Max 1 pixel
Sensitivity on sensor	6.7 mV/nj/cm2. (7.2 LSB/nj/cm2 at 8 bit)
Radiometric at 3100K
Sensitivity on sensor	400 Lux. (Exposure time 1 msec. Max. gain, 100% video on green)
Photometric at 3100K
S/N ratio	15 MHz. R: 53 dB, G: 56 dB, B: 50 dB
	30 MHz. R: 47 dB, G: 50 dB, B: 44 dB
Video output	3 x 8 bit EIA-644 Low Voltage Differential Signalling LVDS.
	Based on NS DS90C032.
Gain range	12 dB
Trigger input	EIA-644 LVDS. Based on NS DS90C031
STROBE output	(for latching video into frame grabber) EIA-644 LVDS
LEN output	(valid video duration) EIA-644 LVDS
Trigger modes	Continuous, Pulse Width Control, Edge Pre-select
Functions controlled by input	Pixel rate and binning
signal on interface connector	RS-232C control enable/disable
Functions input	TTL levels. Internal 4.7 kΩ pull-up
Functions controlled by RS-	Pixel clock select, Binning, Trigger mode, Scan rate, Shutter speed, individual RGB gain,
232C	individual RGB offset.
Communication baud rate
Diagnostics
Operating temperature
Humidity
Storage temp./humidity
Lens mount
Power	12V DC ± 5% 12W (1A)
Dimensions
Weight	1100 g

9.2. Spectral Sensitivity

	1.0
	B	G	R	IR st op
	0 .8
transmission	0 .6
	0 .4
Relative	0 .2
	0 .0
		500	60 0	7 00	80 0
	40 0
		W ave lengt h ( nm )

Fig. 23. Spectral sensitivity.

- 20 -