LC-1000 Lube System Controller

The Trabon microprocessor based LC-1000 Controller is a multi-use solid state controller that is dedicated to the operation and monitoring of intermittent operat- ing series and parallel centralized lubrication systems equipped with a cycle or pressure switch for cycle completion feed back.

The LC-1000 monitors and schedules lubrication inter- vals in either time or stroke/cycle basis in values rang- ing from 1 to 9999. Pump may be self cycling or single cycle type requiring a pulsed output.

Four units are available for 12 VDC, 24 VDC, 115 VAC, or 230 VAC operation. The LC-1000 is easy to program in the field using four mini push-buttons. The programming requires no special knowledge or training of computer language. During power down or outage, all data is saved in EEPROM (Electrically Erasable Pro- gramming Read Only Memory). As power is restored, counting and pump status are restored to values prior to the loss of power.

SPECIFICATIONS

Power Supply

115VAC + 10%, 50/60 Hz, 1 ph

230VAC + 10%, 50/60 Hz, 1 ph

12 VDC + 10%

24 VDC + 10%

Output Loading

 

Main Pump Load:

12 VDC – 230 VAC, 50/60 Hz

10 Amp Relay Output (External Fused by User)

Fault Output Signal:

12 VDC – 230 VAC, 50/60 Hz

1 Amp Resistive Max. (N.O.) Dry Isolated Contact (External Fused by User)

Temperature Range

Do Not Locate unit in Direct Sunlight Operating:: -20OC to 50OC (-4OF to 122OF) Storage: -25OC to 60OC (-13OF to 140OF)

Enclosure

Plastic with Clear Cover, NEMA 4X, IP 66

Display

Supertwist LCD

Annotated 4 Digit

4 LED’s: PWR (GN), LUBE (YW), FAULT (RD),

CYCLE (YW)

Stroke Input

Maximum Input Rate: 10 hz (600 CPM) Nominal 12 Volts for 12 VDC Version

Nominal 24 Volts for 24 VDC, 115 VAC, 230 VAC Versions

Selectable for either Source or Sink Solid State Proximity Switch or Dry Contact 10 mA Max.

Other Inputs

 

Cycle Switch:

12 Volts, Dry Contact, 2.5 mA Max.

 

Counts Half Cycles

Programming Selection

Output ON:

1 to 9999 Seconds, Minutes,

 

Hours, Counts

Output OFF:

1 to 9999 Seconds, Minutes,

 

Hours, Counts

Cycle Counter:

Half Counts (0 to 99)

Pump:

Steady State or Pulsed

Pulse Off Time (Prime) – 3 Seconds Fixed Pulse On Programmable - 0 to 99 Seconds

(Pre-Lube function is not available)

Program Entry

4 Mini Push Buttons – Program, Increase, Shift, Enter

EEPROM

Electrically Erasable Programming Read Only Memory

Page 1 Page 2
Page 1
Image 1
Graco LC-1000 specifications Specifications
Page 1 Page 2

LC-1000 specifications

The Graco LC-1000, a flagship advancement in the world of paint sprayers, has garnered attention for its blend of performance, versatility, and user-friendly design. Engineered for both professionals and DIY enthusiasts, this sprayer excels in various applications, from small touch-up jobs to large-scale projects.

One of the standout features of the Graco LC-1000 is its advanced airless technology. This system allows for a smooth, consistent spray without the need for air compressors. The powerful motor ensures a high-performance output, offering the ability to spray at high pressure and producing a firmer, finer finish. The LC-1000 is capable of handling a wide variety of materials, including paints, stains, and sealers, making it suitable for both interior and exterior use.

Another key characteristic of the Graco LC-1000 is its Compact and Lightweight Design. Weighing in at just over 15 pounds, this sprayer is portable and easy to maneuver. The compact form factor allows for effortless storage and transport, making it an ideal choice for professionals who require mobility on the job site.

The LC-1000 features a QuickChange Tip system, enabling users to easily switch between different spray tips for various applications. This feature greatly enhances efficiency, as it allows for quick adjustments based on the project's requirements. Additionally, the sprayer's variable pressure control lets users customize the output for different surfaces and materials, ensuring optimal coverage and finish.

Equipped with the Graco SmartControl technology, the LC-1000 maintains a consistent spray pattern and pressure, which is crucial for achieving a professional-quality finish. The technology also features a digital display that provides real-time feedback, allowing users to monitor their settings and make immediate adjustments as needed.

Furthermore, the Graco LC-1000 is designed with user safety and convenience in mind. The integrated cleaning system simplifies the maintenance process, making it easier for users to clean the unit after each use. Moreover, the sprayer’s ergonomic handle and lightweight design reduce user fatigue, promoting prolonged use without discomfort.

In summary, the Graco LC-1000 stands out as a powerful, versatile paint sprayer equipped with advanced technology and features. Its user-friendly design, portability, and exceptional performance make it a top choice for anyone looking to achieve a flawless finish on their painting projects. Whether you're a seasoned professional or a weekend warrior, the Graco LC-1000 is engineered to meet your painting needs efficiently and effectively.
Top Page Image Contents