Hitachi BE-IR30, BE-IR31 manual Auto electronic shutter on / off

Page 17

11. Function setting and changes

11-3 Auto electronic shutter on / off

Factory setting for auto electronic shutter is off. If necessary , it can be set to on. Absent the R259 , R260 chip to set the auto electronic shutter to on.

Auto electronic shutter	R259		R260
OFF	0Ω		0Ω	Factory setting
ON	Absent		Absent
0Ω : Part code	RME2068
Description	ERJ2GE0R00X

Location of chip resistors (Main board side B)

BE-IR30 / 31

16

Image 17

Contents Infrared B/W Camera Module Operation Guide Table of Contents Introduction SpecificationsGeneral Composition．Specifications Auto electronic shutter BE-IR30 BE-IR30 External view External view Optical dimensions Two 2.5 mm Dia InstallationBLK GRN YEL RED Typical connectionTypical connection External sync BE-IR31 AGC on / off Function setting and changesGamma response Function setting and changesAuto electronic shutter on / off Fixed Changes to fixed shutter modeBE-IR30 external sync BE-IR31 internal sync HD and VD output BE-IR30 only Options Options BE-IR30C/31C and CS mount adapter option combined dimensions Spectral sensitivity typical example U t i o n