Hitachi BE-IR30, BE-IR31 manual Introduction, General, Composition, Specifications

1.Introduction

Thank you very much for your purchase of the Hitachi BE-IR30/31 Black and White Camera Module.

Prior to using this camera , read this manual carefully.

2.General

The BE-IR30/31 is a monochrome camera module featuring sensitivity in the near infrared spectrum using a 1/3-inch size CCD imaging device. Resolution is outstanding, while the very small size provides optimum suitability for incorporation into equipment where space is limited.

Model coding BE-IR3

Signal system	N: EIA
	P: CCIR
Optical system	A: Without lens mount
	B: With lens mount and board lens
	C: With pinhole lens mount*
Synchronization	0: Internal sync
	1: External sync

*Type C is mount only. Specify at time of order when requiring pinhole lens, CS or C mount adapter

3.Composition

1)Black and white camera module ･･････････････････ 1

2)Interface cable ･････････････････････････････････ 1

Note : The standard accessory cable is 300 mm signal conductor.

Different length cable requires shielding to avoid external noise.

4. Specifications

1) Imaging device	1/3 inch interline CCD
No. of pixels	EIA : 811(H)×508(V)
	CCIR : 795(H)×596(V)
No. of effective pixels	EIA : 768(H)×494(V)
	CCIR : 752(H)×582
Pixel pitch	EIA :	6.35(H)×7.4(v)∝ m
	CCIR :	6.5(H)×6.25(V)∝ m

BE-IR30 / 31 2