EverFocus EZ630 manual Remote Control with EverFocus DVR, Lens Adjustment by Keyboard

Page 32

4.1.3 Lens Adjustment by Keyboard

SETUP

1. LENS

2. EXPOSURE

3. WHITE BAL.

DC

<AWB

d. Move the joystick RIGHT () and LEFT () to adjust the mode and parameters of the selected item.

Press “Menu” to leave and goes to previous menu after setting. Move to “exit” and press “menu” button when you finish all settings.

For detail setting of each setup function, Please refer to “3.3. OSD Menu Setup”.

4.1.3 Lens Adjustment by Keyboard

1.Press Zoom in or Zoom out to adjust zoom; or turn the Joystick clockwise to zoom out, and counterclockwise to zoom in.

2.Press Focus N or Focus F to adjust focus.

4.2 Remote Control with EverFocus DVR

4.2.1 RS-485 Wiring

The connection to the DVR depends on DVR type. The EverFocus EDSR and EDR series (MPEG4) provide 2 looped RJ45 sockets with same pinout as EKB-500 keyboard (chapter 4.1.1). The DVR of Paragon and ECOR series as well as EverFocus video server have 2-pin screw terminal connectors for RS-485 interface.

4.2.2 Camera Operation and Setup by DVR

The DVR have different layout and functionality for PTZ control.

If the DVR does not provide buttons for PTZ OSD menu, following alternative commands can be used for EZ610/630 OSD menu:

Set Preset 95	Open OSD menu
Iris open (Iris +)	Enter / Set
Iris close (Iris -)	ESC / Close OSD menu

32

Image 32

Contents Low Light Inline IP66 Bullet Camera Low Light IR Inline IP66 Bullet CameraInstallation / Operation Instructions EZ610Operation Instruction P/N 4605XZ0610004ARPrecautions Federal Communication Commission Interference Statement Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for helpTable of Contents RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.1.3 Lens Adjustment by Keyboard RS-485 WiringChapter 1.1 Features1 PRODUCT OVERVIEW 1.2 Accessory Parts List 1.3 Specifications 1/601/50 ~1/100,0000.45 Split glass isolation prevents internal reflections1.4 Dimensions Weight1250 g / 2.275 lbs Mounting PatternRed Menu mode Green Lens mode 1.5 Camera Component DescriptionSpeedy-mount Ring Any EverFocus DVR with RS-485 interface for PTZ control 1.6 Related ProductsEverFocus control keyboard EKB500 Chapter 2 INSTALLATION2.1 Wiring and Mounting Video & Power cables RS485 cable optional White RS-485 + Black RS-485 Power SocketPower and Video connection Power RS-4852nd axis Use a hexagon key to loosen this screw to rotate the camera 2.2 Adjust Camera Position1st axis Use a hexagon key to loosen this screw to rotate the camera 3rd axis Loosen lock ring and set screw to rotate camera Sunshield Loosen this screwPage 3 OSD MENU SETUP 3.1 Control Key General Operation Guide3.2 RS485 ID & Baud Rate Setting 3.3 OSD Menu Setup 3.3.1 OSD Menu Tree3.3.2 LENS 3.3.3 EXPOSURE TOP/BOTTOM Auto Tracking White Balance This mode can be used within the color 3.3.4 WHITE BALANCE CONTROL3.3.3.5 D-WDR 3.3.5 DAY NIGHT 3.3.6 3DNR3.3.7 SPECIAL the light sensor at the front of the camera body. default for EZ6303.3.7.3 FREEZE imagePress “RET” to save all settings in MOTION menu and return to the previous menu. Press “END” to save all the menu settings and exit3.3.8 ADJUST previous menu. Press “END” to save all the menu settings and exit3.3.9 RESET RS-485 REMOTE CONTROL Remote control with EKB-500 keyboard4.1.1 RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.2 Remote Control with EverFocus DVR 4.1.3 Lens Adjustment by Keyboard4.2.1 RS-485 Wiring 4.2.2 Camera Operation and Setup by DVREverFocus Electronics Corp