EverFocus EZ630 manual Federal Communication Commission Interference Statement

Page 4
Federal Communication Commission Interference Statement

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WEE

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this case, the user may be urged to take adequate measures.

This Product is RoHS compliant.

Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product.

The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products. Therefore, all specifications are subject to change without prior notice. Misprints reserved.

Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.

4

Image 4
Contents Low Light Inline IP66 Bullet Camera Low Light IR Inline IP66 Bullet CameraInstallation / Operation Instructions EZ610Operation Instruction P/N 4605XZ0610004ARPrecautions Federal Communication Commission Interference Statement Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for helpTable of Contents RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.1.3 Lens Adjustment by Keyboard RS-485 Wiring1 PRODUCT OVERVIEW 1.1 FeaturesChapter 1.2 Accessory Parts List 1.3 Specifications 1/601/50 ~1/100,0000.45 Split glass isolation prevents internal reflections1.4 Dimensions Weight1250 g / 2.275 lbs Mounting PatternSpeedy-mount Ring 1.5 Camera Component DescriptionRed Menu mode Green Lens mode EverFocus control keyboard EKB500 1.6 Related ProductsAny EverFocus DVR with RS-485 interface for PTZ control 2.1 Wiring and Mounting 2 INSTALLATIONChapter Video & Power cables RS485 cable optional White RS-485 + Black RS-485 Power SocketPower and Video connection Power RS-4851st axis Use a hexagon key to loosen this screw to rotate the camera 2.2 Adjust Camera Position2nd axis Use a hexagon key to loosen this screw to rotate the camera 3rd axis Loosen lock ring and set screw to rotate camera Sunshield Loosen this screwPage 3 OSD MENU SETUP 3.1 Control Key General Operation Guide3.2 RS485 ID & Baud Rate Setting 3.3 OSD Menu Setup 3.3.1 OSD Menu Tree3.3.2 LENS 3.3.3 EXPOSURE TOP/BOTTOM 3.3.3.5 D-WDR 3.3.4 WHITE BALANCE CONTROLAuto Tracking White Balance This mode can be used within the color 3.3.5 DAY NIGHT 3.3.6 3DNR3.3.7 SPECIAL the light sensor at the front of the camera body. default for EZ6303.3.7.3 FREEZE imagePress “RET” to save all settings in MOTION menu and return to the previous menu. Press “END” to save all the menu settings and exit3.3.8 ADJUST previous menu. Press “END” to save all the menu settings and exit3.3.9 RESET RS-485 REMOTE CONTROL Remote control with EKB-500 keyboard4.1.1 RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.2 Remote Control with EverFocus DVR 4.1.3 Lens Adjustment by Keyboard4.2.1 RS-485 Wiring 4.2.2 Camera Operation and Setup by DVREverFocus Electronics Corp