EverFocus EZ630 manual White Balance Control, D-Wdr

TOP/BOTTOM	Set the Top/Bottom side of an area for the HSBLC to be adjusted. The value
	adjustable is 0~6.
HEIGHT	Set the height of an area for the HSBLC to be adjusted. The value adjustable
	is 0~6.
RETURN	Press “RET” to save all settings in the HSBLC menu and return to the previous
	menu.
	Press “END” to save all the menu settings and exit.
3.3.3.5 D-WDR

When there are both bright and dark areas in the field of view at same time, this function can help to even the exposure between these areas.

1.Please direct the arrow to point to “D-WDR” by using the UP and DOWN buttons.

2.Select the mode you would like to operate by moving the joystick LEFT or RIGHT.

OFF	Disables D-WDR function (default)
INDOOR	Select this option if you are in an indoor environment.
OUTDOOR	Select this option if you are in an outdoor environment.
Return	Press “RET” to save all settings in the Exposure menu and return to the
	previous menu.
	Press “END” to save all the menu settings and exit.

3.3.4 WHITE BALANCE CONTROL

The screen color can be adjusted by using the WHITE BALANCE function.

Please direct the arrow to point to “WHITE BAL” by using the UP and DOWN buttons. Please select the mode you would like to operate by pressing the LEFT or RIGHT button.

Please select one of the 6 modes below:

ATW	Auto Tracking White Balance: This mode can be used within the color
	temperature range from 5,500°K to 6,000°K (eg, fluorescent light, outdoor,
	sodium vapor lamp or inside tunnels).
AWB	Auto White Balance: This mode can be used within the color temperature range
	from 2,500°K to 10,000°K. (default)

AWC ->SET To find the optimal setting for the current luminance environment in this mode, point the camera toward a sheet of white paper, and press “SET”. If the environment changes, you will have to readjust it.

24