EverFocus EZ630 manual Accessory Parts List

Page 8
1.2 Accessory Parts List

IP66 weather resistant

Dual voltage (12VDC/24VAC) with line lock to AC supply

1.2 Accessory Parts List

Manual backgroundPlease be careful when you unpack the box and the electronic device inside. Check and make sure that you have all the items listed below inside the original box:

Camera Unit x 1

Speedy Mount Ring x 1

Surface Wire Slot Filler x 1 (optional, may vary in different countries)

Operation Manual x 1

Video Test Cable x 1

Power Supply Pigtail x 1

Mounting Kit x 1

Mounting kit includes:

Long Screws x 4 (for attaching EZ Mount Ring to mounting surface)

Short Screws x 4 (for connecting camera base to EZ Mount Ring)

Expanding Anchors x 4

Hex key x 1 (for adjusting camera)

Hexagon wrench x 1 (for adjusting sunshield and set screw in base)

Mounting Template x 1

Note: If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service. The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

8

Image 8
Contents Low Light Inline IP66 Bullet Camera Low Light IR Inline IP66 Bullet CameraInstallation / Operation Instructions EZ610Operation Instruction P/N 4605XZ0610004ARPrecautions Federal Communication Commission Interference Statement Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for helpTable of Contents RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.1.3 Lens Adjustment by Keyboard RS-485 WiringChapter 1.1 Features1 PRODUCT OVERVIEW 1.2 Accessory Parts List 1.3 Specifications 1/601/50 ~1/100,0000.45 Split glass isolation prevents internal reflections1.4 Dimensions Weight1250 g / 2.275 lbs Mounting PatternRed Menu mode Green Lens mode 1.5 Camera Component DescriptionSpeedy-mount Ring Any EverFocus DVR with RS-485 interface for PTZ control 1.6 Related ProductsEverFocus control keyboard EKB500 Chapter 2 INSTALLATION2.1 Wiring and Mounting Video & Power cables RS485 cable optional White RS-485 + Black RS-485 Power SocketPower and Video connection Power RS-4852nd axis Use a hexagon key to loosen this screw to rotate the camera 2.2 Adjust Camera Position1st axis Use a hexagon key to loosen this screw to rotate the camera 3rd axis Loosen lock ring and set screw to rotate camera Sunshield Loosen this screwPage 3 OSD MENU SETUP 3.1 Control Key General Operation Guide3.2 RS485 ID & Baud Rate Setting 3.3 OSD Menu Setup 3.3.1 OSD Menu Tree3.3.2 LENS 3.3.3 EXPOSURE TOP/BOTTOM Auto Tracking White Balance This mode can be used within the color 3.3.4 WHITE BALANCE CONTROL3.3.3.5 D-WDR 3.3.5 DAY NIGHT 3.3.6 3DNR3.3.7 SPECIAL the light sensor at the front of the camera body. default for EZ6303.3.7.3 FREEZE imagePress “RET” to save all settings in MOTION menu and return to the previous menu. Press “END” to save all the menu settings and exit3.3.8 ADJUST previous menu. Press “END” to save all the menu settings and exit3.3.9 RESET RS-485 REMOTE CONTROL Remote control with EKB-500 keyboard4.1.1 RS - 485 Wiring 4.1.2 OSD Menu Setting by Keyboard4.2 Remote Control with EverFocus DVR 4.1.3 Lens Adjustment by Keyboard4.2.1 RS-485 Wiring 4.2.2 Camera Operation and Setup by DVREverFocus Electronics Corp