5.3 INSTALLATION ON A Mac OS X
Pre-installation checklist
■Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
Compatible Mac | Power Macintosh G3✽1, PowerBook G3✽1, |
| Power Macintosh G4, iMac, iBook, |
| Power Macintosh G4 Cube, or PowerBook G4, Power Macintosh G5 |
Operating System | Mac OS X (compatible with version 10.2.6 to 10.3.1) |
RAM | 192 MB minimum, 256 MB or more recommended |
Hard disk space | Amount required for installation: 200 MB minimum |
| Amount required for operation: 400 MB minimum |
| (When using ImageMixer VCD2 for FinePix: 2 GB or better) |
Display | 800 ⋅ 600 pixels or better, at least 32,000 colors |
| (When using ImageMixer VCD2 for FinePix: 1024 ⋅ 768 or better) |
Internet connection✽2 | i To use the FinePix Internet Service or mail attachment function |
| An Internet connection and |
| i Connection speed: 56 k or better recommended |
|
|
✽1 Models with a USB port as a standard feature
✽2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet connection.
◆ Notes ◆
i Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is used. If other applications will be used at the same time, allocate the additional amount required for those applications also.
58