Elation Professional 28 manual Main Menu Functions, Address Menu, Setting/Changing the DMX Address

Page 21

Focus Spot 250R™

Main Menu Functions

1. ADDRESS MENU -

AOO1 - A511 (Value) - This is where you set the fixtures DMX address.

Setting/Changing the DMX Address

After applying power to the FOCUS SPOT 250R™ the LED will display the fixture’s current DMX address immediately after the reset sequence. If the fixture is not receiving a DMX signal the display will flash continuously.

To set or adjust a DMX address, please follow the procedure below:

1. Switch on the FOCUS SPOT 250R™ and wait for the fixture reset process to finished.

2.Press the Mode/Esc button to access the main menu. Toggle through the menu by pressing the Up and Down buttons until the display shows A001. Tap the enter button to make changes to the address, the current three digit address will immediately begin to flash.

3.While the current three-digit address is flashing, use theUp and Down buttons to select adjust the address. Lock your new address into the unit’s memory by pressing the Enter button. After the new address has been successfully stored into the fixture’s memory the LED will briefly readout PASS.

The DMX address is non-destructible and will remain in the fixture’s memory even when power to the fixture has been switched off. Memory is backed-up and retained by an internal power source with a five year shelf life.

2. TEST MENU -

T-01 - T-XX(Test) - Tests the functions of each channel. There are eleven DMX channels, but only channels 1,2,3,4, and 6 can be tested.

TEST MAIN MENU

TEST - This will test the functions of each channel.

1.Access the main menu.

2.Tap the UP button until TESTis displayed, press ENTER.

3.The display will show T-01. You can now press the up button and test the different

©Elation Professional®

21

Focus Spot 250R™

Image 21
Contents Focus Spot 250R Focus Spot 250R Elation Professional Contents General Information Focus Spot 250R Never open this fixture while in use Safety Instructions Focus Spot 250R Features General Guidelines Installing or replacing the lamp Lamp Installation InstructionsLamp Optimization Mounting and Installation MountingMounting points Secure the Focus Spot 250R DMX-512 control connection Understanding DMXDMX-512 connection with DMX terminator ControllerFixture DMX address Focus Spot 250R Fixture Menu Default settings shadedRese ALL Main Menu Functions Setting/Changing the DMX AddressAddress Menu Test MenuPlay Main Menu Play MenuRese Reset Menu Lamp MenuRese Main Menu Focus Spot 250R Time Menu Time Main MenuRpan Menu Fine Menu Rtlt MenuMIC Menu Degr MenuDisp Menu Display MenuFixture Settings Spec MenuSpec Main Menu Controller Settings Reload the original factory settings Edit Menu Focus Spot 250R Focus Spot 250R Focus Spot 250R DMX Channel Traits PAN Channel 9 Focus Error Codes Focus Spot 250R Cleaning and Maintenance Year Limited Warranty Focus Spot 250R Power supply user selectable Technical SpecificationsPhotometric Data Gobos Dimensional Drawings Focus Spot 250R Elation Professional Focus Spot 250R Elation Professional Elation Professional