Elation Professional 28, 05 FOCUS SPOT 250R, Rev 10 manual Focus Spot 250R

Page 33

Focus Spot 250R™

number of steps under Step (S-01- S-48). You can edit the individual scenes under Edit.

1.Access the main menu.

2.Tap the UP button until EDITis displayed, press ENTER.

3.Tap the UP button until RUNis displayed, press ENTER.

4.“AUTO is displayed. If you press the UP button it will show S O U N . Select which one you want to activate, and press ENTER.

5.Press UP, to select ALON or NAST. Which mean stand alone, and master/slave mode.

6.Select a mode, and press ENTER to confirm.

7.Press MODE/ESC to return to the main menu.

 

STEP - With this function you can program the number of

steps in your

 

individual Program.

 

1.Access the main menu.

2.Tap the UP button until EDITis displayed, press ENTER.

3.Tap the UP button until STEPis displayed, press ENTER.

4.The display shows “S-01,” this indicates the first step of your program. You can call up to 48 scenes in “Run.” For example; if “S-05” is displayed, it means that the scene will “RUN” the first 5 scenes you saved in “Edit.”

5.Press ENTER to save and MODE/ESC to exit.

SC01 - This function allows you to choose the total number of scenes in your internal program.

1.Access the main menu.

2.Tap the UP button until “EDIT” is displayed, press ENTER.

3.Tap the UP button until “SC01” is displayed.

4.The display indicates “SC01,” this stands for the first scene of your program. You may recall up to 48 scenes. For example, if you choose “SC05,” and then select the “Run” function, the first 5 scenes you saved in “Edit” mode will run.

5.Press ENTER to save and MODE/ESC to exit.

Editing procedure 1: Using the control board only. 1. Access the main menu.

©Elation Professional®

33

Focus Spot 250R™

Image 33
Contents Focus Spot 250R Focus Spot 250R Elation Professional Contents General Information Focus Spot 250R Never open this fixture while in use Safety Instructions Focus Spot 250R Features General Guidelines Installing or replacing the lamp Lamp Installation InstructionsLamp Optimization Mounting and Installation MountingMounting points Secure the Focus Spot 250R DMX-512 control connection Understanding DMXDMX-512 connection with DMX terminator ControllerFixture DMX address Focus Spot 250R Fixture Menu Default settings shadedRese ALL Main Menu Functions Setting/Changing the DMX AddressAddress Menu Test MenuPlay Main Menu Play MenuRese Reset Menu Lamp MenuRese Main Menu Focus Spot 250R Time Menu Time Main MenuRpan Menu Fine Menu Rtlt MenuMIC Menu Degr MenuDisp Menu Display MenuFixture Settings Spec MenuSpec Main Menu Controller Settings Reload the original factory settings Edit Menu Focus Spot 250R Focus Spot 250R Focus Spot 250R DMX Channel Traits PAN Channel 9 Focus Error Codes Focus Spot 250R Cleaning and Maintenance Year Limited Warranty Focus Spot 250R Power supply user selectable Technical SpecificationsPhotometric Data Gobos Dimensional Drawings Focus Spot 250R Elation Professional Focus Spot 250R Elation Professional Elation Professional