Fixture Menu | Elation Professional 05 FOCUS SPOT 250R, 28, Rev 10

Focus Spot 250R™

8. FIXTURE MENU

On-Board System Menu: The FOCUS SPOT 250R™ comes with an easy to navigate system menu. This next section will detail the functions of each command in the system menu.

Control Board: The control panel located on the top of the fixture allows you to access the main menu and make all necessary adjustments to the Focus Spot 250R™. During normal operation, tapping the “MODE” key once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting, tap the ENTER button to activate that field and use the UP and Down button to adjust the field. Tapping the Enter button once more will confirm your setting. Once a setting is saved the LED will briefly readout PASS to confirm a new setting has been made and locked into memory. You may exit the main menu at any time without making any adjustments by tapping the EXIT button.

MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of the unit. Press this button to activate the system menu. Tap the UP button until you reach the function you wish to change. When you reach the function you wish to change tap the ENTER button once to select that menu function. When a function is selected the menu will begin to flash, use the UP or DOWN button to change the function. Once your changes are made tap the ENTER button yet again to lock the change in the system menu. To exit without making any changes tap the MODE/ESC button.

Default settings shaded.

1	ADDR	A001~A511				Indicate the staring DMX address
						A001 also is the setting for slave
2	TEST	T-01~T-XX				Automatically test the function
3	PLAY	RUN		MSTR/ALON		Runs fixture as “master” or “alone”
						for auto
		AUDI		MSTR/ALON		Runs fixture as “master” or “alone”
						for audio
		AUTO		OFF/ RUN /	AUDI	Runs fixture when no DMX signal is
						present
4	LAMP	ON	/OFF			Manually switches lamp “on” and
						“off”

Focus Spot 250R™