Nikon F50 instruction manual Camera Care Tips

Page 60

CAMERA CARE TIPS

1. Do not touch the

2. Do not touch the

camera's reflex mirror

shutter curtains.

or focusing screen.

 

Remove dust with a

 

blower brush.

 

3.Do not touch the DX contacts. Keep them clean with a blower brush.

4.Clean the viewfinder eyepiece with a soft, clean cloth. Do not use alcohol.

5.Clean glass surfaces, such as the lens or the eyepiece, with a blower brush; do not use lens tissue, silicon type eyeglass tissue, etc. To remove dirt and smudges, use soft cotton moistened with denatured alcohol and wipe surfaces in a spiral motion from centre to periphery. Do not leave traces .

Caution!

Aspray gun-type blower may damage the optical glass if used to clean the lens, especially if ED glass is used for the front lens element. To avoid damage, hold the blower upright with its nozzle more than 30cm from the lens surface, and keep the nozzle moving so the stream of air is not concentrated in one spot.

60

Image 60
Contents Nikon Foreword Contents UillJJ Ar.r.IP.~Sflrvshoe For Nikon dedicated Cnppr11i11ht~ Learn how to hold your camera Before Shooting When mounting lens Mounting LensWith a non-CPU lens Usable LensesIf lens aperture is not set at its minimum setting Installing Battery Loading Film Page Setting Camera to Autofocus Mode Regarding the FSO/FSOosautofocus featureShooting Programmed Auto Exposure Mode Shutter-Priority Auto Exposure ModeAvailable Exposure Modes Aperture-Priority Auto Exposure Mode Manual Exposure ModeMetering System Program Selection Guide OAUto General-Purpose Landscape Program9Portrait Program Close-Up Program Sport Program~ Silhouette Program Night Scene Program ~Motion Effect ProgramOperation in Programmed Auto Exposure Mode Cb l~~@ If a blinks in the LCD panel Page ~~ ~~F Viewfinder InformationUsing Built- In Flash Auto RewindTo change a combination of shutter speed/aperture Operation in Other Exposure Modes IJPSAti+ . ~ .- Correct exposure Using Built-In Flash ~~!~ F5.0 Reset Function To reset the camerasmode to the original factory settingAF AF Mode Selection ISO ISO Confirmation/Setting~ Exposure Compensation pages 36 to Co Q0 CO QOcaD To clear memoryAF Mode Selection Single Servo AF and Continuous Servo AFISO CONFIRMATION/SETTING To confirm ISO film speed for OX-coded filmTo manually set ISO film speed for non- OX-coded film Exposure Compensation FII~ +0.51 Other Controls SELF-TIMER Operation II TI ME F5.sM To Shoot AN OFF-CENTRE Subject Using AE-L Button Shutter release button Cases Where Autofocus is not Acceptable Manual Focus Setting Dateitime for F50 0 only Setting date and time 9Y-3~II-,~-, jj= Imprinting date/timeReplacing lithium battery for imprinting function Flash Photography Using BUILT-IN Flash IeS FS.b25 F5.6 Flash shooting distance rangeUsing guide number to estimate the maximum shooting distance SB-28, SB-27, SB-26, SB-25 or SB-24users Usable AF Nikkor Lenses with Built-In Flash Usable non-zoom lensesIspeedlight Compatibility A MMiscellaneous Lenses Mountable Nikkor lensesNikkor lens compatibility Lenses AutofocusCamera Care Tips Page Camera body Specifications ControlShutter speeds Built-in TTL flash Battery life Centre-Weighted Metering About the F50/F50D Metering SystemMatrix Metering Err CJ TI ME Err Err TTL About LCDPage Nikon Nikon F50/F50o Shooting in Simple Mode IIS When Youive Taken a Complete Roll