Nikon F50 instruction manual Err TTL, About LCD

Page 70

I LCD panel

Viewfinder

Shutter

Blinking Symbol

Blinking Symbol

 

 

~

Locked

(after flash

 

shooting)

 

,-

 

Err TTL

Locked

C ,- ,-

(in P IS)

 

 

About LCD

The camera uses a Liquid Crystal Display (LCD) of the highest quality which, under conditions of normal use, should provide several years of reliable operation. After this period, contrast may deteriorate and display information may start to fade. You can have the LCD replaced at a nominal charge by contacting an authorised Nikon dealer or service facility.

Cause and Remedy

I

Light might be insufficient. Confirm shooting distance and, if necessary, move closer to the subject or select a wider aperture.

Speedlight attached is not set at TIL. Set the Speedlight'sflash mode to TIL. Or, use Aperture- Priority Auto or Manual exposure mode.

At temperatures between freezing, the LCD's response time slows down; it goes back to normal when the temperature rises.

As the temperature rises, the LCD turns reddish; as the temperature drops, the LCD turns bluish. These changes do not affect normal use.

70

Image 70
Contents Nikon Foreword Contents UillJJ Ar.r.IP.~Sflrvshoe For Nikon dedicated Cnppr11i11ht~ Learn how to hold your camera Before Shooting With a non-CPU lens When mounting lensMounting Lens Usable LensesIf lens aperture is not set at its minimum setting Installing Battery Loading Film Page Setting Camera to Autofocus Mode Regarding the FSO/FSOosautofocus featureShooting Shutter-Priority Auto Exposure Mode Programmed Auto Exposure ModeAvailable Exposure Modes Manual Exposure Mode Aperture-Priority Auto Exposure ModeMetering System OAUto General-Purpose Landscape Program Program Selection Guide9Portrait Program Sport Program Close-Up Program~ Silhouette Program Night Scene Program ~Motion Effect ProgramOperation in Programmed Auto Exposure Mode Cb l~~@ If a blinks in the LCD panel Page ~~ ~~F Viewfinder InformationUsing Built- In Flash Auto RewindTo change a combination of shutter speed/aperture Operation in Other Exposure Modes IJPSAti+ . ~ .- Correct exposure Using Built-In Flash ~~!~ F5.0 Reset Function To reset the camerasmode to the original factory settingISO ISO Confirmation/Setting AF AF Mode Selection~ Exposure Compensation pages 36 to Co Q0 CO QOcaD To clear memoryAF Mode Selection Single Servo AF and Continuous Servo AFTo confirm ISO film speed for OX-coded film ISO CONFIRMATION/SETTINGTo manually set ISO film speed for non- OX-coded film Exposure Compensation FII~ +0.51 Other Controls SELF-TIMER Operation II TI ME F5.sM To Shoot AN OFF-CENTRE Subject Using AE-L Button Shutter release button Cases Where Autofocus is not Acceptable Manual Focus Setting Dateitime for F50 0 only Setting date and time 9Y-3~II-,~-, jj= Imprinting date/timeReplacing lithium battery for imprinting function Flash Photography Using BUILT-IN Flash IeS FS.b25 F5.6 Flash shooting distance rangeUsing guide number to estimate the maximum shooting distance SB-28, SB-27, SB-26, SB-25 or SB-24users Usable AF Nikkor Lenses with Built-In Flash Usable non-zoom lensesIspeedlight Compatibility A MMiscellaneous Lenses Mountable Nikkor lensesNikkor lens compatibility Lenses AutofocusCamera Care Tips Page Camera body Specifications ControlShutter speeds Built-in TTL flash Battery life About the F50/F50D Metering System Centre-Weighted MeteringMatrix Metering Err CJ TI ME Err Err TTL About LCDPage Nikon Nikon F50/F50o Shooting in Simple Mode IIS When Youive Taken a Complete Roll