Nikon F50 instruction manual Using Built- In Flash, Auto Rewind

Using Built- In Flash

Use the built-in flash not only when the ready-light blinks, but also when your subject is in shadow or backlit.

See pages 51 to 55 .

Auto Rewind

When the film reaches the end of the roll, auto rewind begins . During rewinding, ta and ~ blink in the LCD panel. After rewind automatically stops, frame counter shows E and ta blinks for a few seconds. You can then remove film cartridge.

•When battery power is very weak, or when the temperature is very low, film may not rewind at the end of roll and Err appears in the LCD panel. In this case, replace battery with a fresh one, or wait for the temperature to rise and then press the rewind button.

To rewind film at mid-roll:Press the rewind button on the camera bottom.

24