Nikon F50 instruction manual ~~!~ F5.0

Page 29

 

Viewfinder information

 

H : blinks-Overexposure possible*: Select smaller aperture (l arger f- number) and/or

[• ~~!~ F5.0

fas ter shutter speed. Or, use a filter such as the Nikon ND fi lter.

 

[ . : 2 5 ~~ o~

lo blinks-Underexposure possible*: Select a wider aperture (smaller f-number)

.--......_---=-:='--'-

and/or a slower shutter speed. Or, use the built-in flash or an accessory Nikon

[ .~~ q~F5.0

Speedlight.

F5.0

~ blinks-Flash recommendation: Not enough light. Use the built-in fl ash or an

 

accessory Niko n SpeedJight.

 

Shutter speed indication blinks (and A blinks in the LCD panel)-Picture blur

 

possible**: Automatically selected shutter speed is low and picture blur may occur due

 

to camera shake or subject movement. To reduce the possibility of blur, hold camera

 

very steady, use a tripod or use the built-in flash or an accessory Nikon SpeedJight.

 

Selecting a wider aperture (smaller f-number) results in a faster shutter speed.

 

blinks-Unacceptable autofocus condition

 

Your subject is inappropriate for autofocus operation. Set the focus switch to M and

 

foc us manually. (See page 45. )

For Err indicati on, see pages 68 to 70.

*For Shutter- Priority Auto and Apertu re-Priority Auto exposure modes. **For Aperture-Priority Auto exposure mode.

29

Image 29
Contents Nikon Foreword Contents UillJJ Ar.r.IP.~Sflrvshoe For Nikon dedicated Cnppr11i11ht~ Learn how to hold your camera Before Shooting Mounting Lens When mounting lensWith a non-CPU lens Usable LensesIf lens aperture is not set at its minimum setting Installing Battery Loading Film Page Regarding the FSO/FSOosautofocus feature Setting Camera to Autofocus ModeShooting Available Exposure Modes Programmed Auto Exposure ModeShutter-Priority Auto Exposure Mode Metering System Aperture-Priority Auto Exposure ModeManual Exposure Mode 9Portrait Program Program Selection GuideOAUto General-Purpose Landscape Program ~ Silhouette Program Close-Up ProgramSport Program ~Motion Effect Program Night Scene ProgramCb l Operation in Programmed Auto Exposure Mode~~@ If a blinks in the LCD panel Page Viewfinder Information ~~ ~~FAuto Rewind Using Built- In FlashTo change a combination of shutter speed/aperture IJPSAti Operation in Other Exposure Modes+ . ~ .- Correct exposure Using Built-In Flash ~~!~ F5.0 To reset the camerasmode to the original factory setting Reset Function~ Exposure Compensation pages 36 to AF AF Mode SelectionISO ISO Confirmation/Setting Co Q0 To clear memory CO QOcaDSingle Servo AF and Continuous Servo AF AF Mode SelectionTo manually set ISO film speed for non- OX-coded film ISO CONFIRMATION/SETTINGTo confirm ISO film speed for OX-coded film Exposure Compensation FII~ +0.51 Other Controls SELF-TIMER Operation II TI ME F5.sM To Shoot AN OFF-CENTRE Subject Using AE-L Button Shutter release button Cases Where Autofocus is not Acceptable Manual Focus Setting Dateitime for F50 0 only 9Y-3~ Setting date and timeImprinting date/time II-,~-, jj=Replacing lithium battery for imprinting function Flash Photography IeS FS.b Using BUILT-IN FlashFlash shooting distance range 25 F5.6Using guide number to estimate the maximum shooting distance SB-28, SB-27, SB-26, SB-25 or SB-24users Usable non-zoom lenses Usable AF Nikkor Lenses with Built-In FlashA M Ispeedlight CompatibilityMiscellaneous Mountable Nikkor lenses LensesLenses Autofocus Nikkor lens compatibilityCamera Care Tips Page Camera body Control SpecificationsShutter speeds Built-in TTL flash Battery life Matrix Metering Centre-Weighted MeteringAbout the F50/F50D Metering System Err CJ TI ME Err About LCD Err TTLPage Nikon Nikon F50/F50o Shooting in Simple Mode IIS When Youive Taken a Complete Roll