Nikon F50 instruction manual Iso Confirmation/Setting, To confirm ISO film speed for OX-coded film

Page 35

ISO CONFIRMATION/SETTING

ItJ

<Q) cO OeQ])

Co ® ®

Press to adjust

~ r- - A -

i :JfSo~ 400

To confirm ISO film speed for OX-coded film:

Usable film speed range of DX-coded film is ISO 25 to 5000.

With the Exposure Mode Menu, press the menu button to activate the Optional-Function Menu . Press the button above ISO.The LCD shows the ISO film speed of the loaded DX-coded mm.

To return to the last selected exposure modelProgram, press the button above ISO.

With a OX-coded film, film speed is automatically set on the camera body; you cannot adjust.

e~~;:-===::::~~--Press to complete setting

To manually set ISO film speed for non- OX-coded film:

When using non -DX-coded film, manually set the ISO film speed number. Usable film speed range is ISO 6 to 6400.

If you have installed non-DX-coded film and closed the camera back, the ISO setting screen is automatically activated on the LCD panel. Adjust the film speed by pressing the button above the . (up) or

T(down) indication . To change film speed rapid ly, hold tbe button down . To complete the setting, press the button above ISO. The LCD shows the last selected exposure mode/Program .

• Until setting is completed, the sbutter remains locked, and the menu button is deactivated .

• If you want to recall the ISO setting screen after completi ng the setting, activate the Optional - Function Menu and press the button above ISO.

35

Image 35
Contents Nikon Foreword Contents UillJJ Ar.r.IP.~Sflrvshoe For Nikon dedicated Cnppr11i11ht~ Learn how to hold your camera Before Shooting Usable Lenses When mounting lensMounting Lens With a non-CPU lensIf lens aperture is not set at its minimum setting Installing Battery Loading Film Page Regarding the FSO/FSOosautofocus feature Setting Camera to Autofocus ModeShooting Available Exposure Modes Programmed Auto Exposure ModeShutter-Priority Auto Exposure Mode Metering System Aperture-Priority Auto Exposure ModeManual Exposure Mode 9Portrait Program Program Selection GuideOAUto General-Purpose Landscape Program ~ Silhouette Program Close-Up ProgramSport Program ~Motion Effect Program Night Scene ProgramCb l Operation in Programmed Auto Exposure Mode~~@ If a blinks in the LCD panel Page Viewfinder Information ~~ ~~FAuto Rewind Using Built- In FlashTo change a combination of shutter speed/aperture IJPSAti Operation in Other Exposure Modes+ . ~ .- Correct exposure Using Built-In Flash ~~!~ F5.0 To reset the camerasmode to the original factory setting Reset Function~ Exposure Compensation pages 36 to AF AF Mode SelectionISO ISO Confirmation/Setting Co Q0 To clear memory CO QOcaDSingle Servo AF and Continuous Servo AF AF Mode SelectionTo manually set ISO film speed for non- OX-coded film ISO CONFIRMATION/SETTINGTo confirm ISO film speed for OX-coded film Exposure Compensation FII~ +0.51 Other Controls SELF-TIMER Operation II TI ME F5.sM To Shoot AN OFF-CENTRE Subject Using AE-L Button Shutter release button Cases Where Autofocus is not Acceptable Manual Focus Setting Dateitime for F50 0 only 9Y-3~ Setting date and timeImprinting date/time II-,~-, jj=Replacing lithium battery for imprinting function Flash Photography IeS FS.b Using BUILT-IN FlashFlash shooting distance range 25 F5.6Using guide number to estimate the maximum shooting distance SB-28, SB-27, SB-26, SB-25 or SB-24users Usable non-zoom lenses Usable AF Nikkor Lenses with Built-In FlashA M Ispeedlight CompatibilityMiscellaneous Mountable Nikkor lenses LensesLenses Autofocus Nikkor lens compatibilityCamera Care Tips Page Camera body Control SpecificationsShutter speeds Built-in TTL flash Battery life Matrix Metering Centre-Weighted MeteringAbout the F50/F50D Metering System Err CJ TI ME Err About LCD Err TTLPage Nikon Nikon F50/F50o Shooting in Simple Mode IIS When Youive Taken a Complete Roll