In this case, you will not be able to take more pictures until you have either deleted one or more pictures as described above or reset the camera’s memory. If you should choose to reset the camera’s memory, you should be sure to transfer to your computer all data currently stored in camera to save the pictures you would like to keep (see “ Connecting Your Camera to a Computer” for information on how to connect your camera to a computer for data transfer). After removing the camera from the computer’s card slot, replace the battery unit, being careful not to get your fingers caught between the battery unit and the camera body. Turn the camera on, then hold the ERASE button down while pressing the ADJUST button.
ADJUSTERASE
Hold the ADJUST and ERASE buttons down until E-
Note: Pressing the ADJUST and ERASE buttons simultaneously will permanently erase all photographs currently in memory.
Once the reformatting process is complete, the exposure count indicator will show the maximum number of exposures possible at the current quality setting. All picture data stored in the camera’s memory will have been erased.
Beyond the Basics : Deleting Pictures from Memory | 29 |