Nikon Coolpix 100 manual Quality

Page 26

To adjust the time or date, first make sure that the camera is turned off. Then turn the camera on while pressing the QUALITY button.

QUALITY

After the camera has finished its initial check, the first two digits of the date/ time display will flash.

Press the QUALITY button until the item you want to change begins to flash.

Pressing the ADJUST button changes the value of the selected item.

Pressing the ADJUST button once will increase the value of the selected item by one; holding the button down will cause the value to increase rapidly. When the maximum value is reached, pressing ADJUST will return the item its lowest value.

14	First Steps : Setting the Time and Date

Image 26

Contents Page Page Coolpix Page Modifications Safety Precautions Use only AA alkaline batteries Observe proper precautions when handling batteriesObserve caution when operating the flash Keep out of reach of childrenHow to hold the Coolpix Items prohibited by law from being copied or reproduced Comply with copyright noticesContents Troubleshooting Page Overview Overview Before You Begin What’s in this PackageParts of the Coolpix Attaching the Wrist Strap Guide to the Control Panel Display Through the Viewfinder Do not drop Avoid sudden changes in temperatureDo not touch the lens with your fingers Keep away from strong magnetic fieldsBatteries First Steps Putting Batteries in Your Camera Turning the Camera On Checking Battery Level Battery level normalSetting the Time and Date Quality Adjust button Turn the power on Check the number of exposures remaining Taking Your First PhotographCheck the camera’s settings Ready the cameraCompose a photograph Half-press the shutter release buttonFull-press the shutter release button Using the Flash Beyond the BasicsTo change the flash setting, press the Adjust button Red-Eye Reduction Image Quality Macro Close-Up Using the Automatic Timer Connecting Your Camera to a Computer Beyond the Basics Connecting Your Camera to a Computer Deleting Pictures from Memory Adjusterase Storage CleaningCaring for Your Camera Troubleshooting General problemsIndication Exposure count shows zero Images are over- or under-exposedError codes Specifications CCDJpeg Index IndexIndex EC Declaration of Conformity