Macintosh
Connecting to a Computer
Before connecting your camera to a Macintosh computer for the first time, make sure that you install Nikon Capture 3. After installing Nikon Capture 3, turn the camera on and connect it to the computer, or insert the memory card into a card reader or a PC card slot.
For more information about connecting your camera to a computer, see the documentation provided with your camera.
D1 / D1X / D1H (IEEE 1394 / Firewire Interface)
D100 (USB Interface)
COOLPIX Series (USB Interface)
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure that the battery is fully charged. If in doubt, charge the battery before use or use an AC adapter (available separately). If the battery is exhausted during transfer, transfer will be interrupted and data may be lost.