Windows
Windows 98 Second Edition (SE)
Before You Begin
Confirm that your
Click the My Computer icon on the desktop with the right mouse button and select Prop- erties from the menu that appears. The Sys- tem Properties dialog will be displayed; click the Device Manager tab.
The bus controller for your IEEE 1394 board or card should be listed un- der “1394 Bus Controller.”
If “1394 Bus Controller” is not listed in the Device Manager, or if your IEEE 1394 interface board or card is listed as an unknown or miscellaneous device or is preceded by a red or yellow warning icon, follow the instructions in the manual provided with the board to ensure that the drivers are properly installed.
After installing Nikon Capture 3 and restarting the computer, connect your camera to the computer using an IEEE 1394 cable and turn on the camera. The camera is registered auto- matically.
Follow the instructions below to check that the camera has been correctly registered with the system.
Step 1
Once registration is complete, check that the D1X (or D1 or D1H) has been correctly registered with the system. Click the My Computer icon on the desktop with the right mouse button and select Properties from the menu that appears. The System Properties dialog will be displayed; click the Device Manager tab.
Updating the Drivers for the D1
If you are already using the D1 with Nikon View DX or an earlier version of Nikon Capture, you will need to update the camera drivers as described below in “Updating the Drivers for the D1.”
Before Connecting the Camera
Be sure to install Nikon Capture 3 before connecting your camera to the computer.
90