Configuring the Camera’s Wireless Settings
3 Choose the desired SSID (A9) and press the k button.
Up to ten SSIDs, with network profiles configured with the camera and those detected by the camera, are listed.
If connection by any wireless device is not allowed with an access point and the desired SSID is not detected, select New and press the kbutton. Enter a network name (SSID) (up to 32 alphanumerical characters) in the SSID screen. If using
complimentary Wayport subscription, do not enter Wayport_Access as a new network name (SSID) (in the United States only).
For information on entering text, see “Entering Text with the Camera” (A27).
Choose an SSID with a network profile and press the kbutton. Profile settings can be edited by following the same procedure used for SSIDs for which network profiles have not been configured. To delete an existing SSID profile, select the SSID and press the lbutton. If using complimentary Wayport subscription, do not edit or delete the Wayport_Access SSID (in the United States only).
Up to ten wireless LAN network profiles can be stored in the camera. If ten profiles have already been configured and you would like to add a new one, first use the camera or the Utility to delete an existing network profile from the camera.
CSSID Selection Screen
SSIDs with network profiles are listed first regardless of signal strength. The icon to the left of each SSID indicates signal strength and is
displayed in red when out of range (A52, 53).
The icon to the right of each SSID shows the status of the camera’s network profiles: B (home wireless LAN profile configured) A (public wireless LAN profile configured)
See “Public Wireless LAN” (Aiv) for more information on countries
in which public wireless LANs can be accessed by, and the wireless service providers that support connection of, this camera.
If the full network name cannot be displayed, highlight the SSID and press the g(j) button to display the full name. Press the g (j) button again to return to the select SSID screen.
30