Adjusting Sensitivity | Shooting Mode |
Sensitivity increases the use that the camera makes of available light, allowing faster shutter speeds to be employed. However as sensitivity is increased, the picture may become noisy. Standard sensitivity is equivalent to film ISO 100. The camera will automatically increase sensitivity in low levels of ambient lighting if set to AUTO. The sensitivity can be increased manually from the standard value to allow faster shutter speeds in low light.
Set the Mode dial to , then rotate the Command dial while pressing the sensitivity button until the desired sensitivity value is displayed.
Notes: Sensitivity Setting
•Manual adjustment of Sensitivity is only possible in mode. When the
Mode dial is set to after Sensitivity is set, the setting temporarily is canceled and the camera automatically selects AUTO setting. If the Mode dial
is set to again, the previously adjusted Sensitivity returns.
•When the Sensitivity is set to ISO 200, 400 or 800, or Sensitivity is automatically increased in dark conditions with AUTO, a noisier image compared to standard Sensitivity may be recorded.
•In normal shooting situations, 400 or lower Sensitivity setting is recommended. Use the 800 setting in a situation such as when you want to avoid effects of camera shake by using a fast shutter speed. When using 800 Sensitivity, it is recommended that you turn off the Image Sharpening (p. 114) in Shooting menu.
Setting | Shooting sensitivity |
100Standard sensitivity (equivalent to ISO 100)
• Recommended except for shooting in dark conditions or with
200Equivalent to ISO 200
400Equivalent to ISO 400
800Equivalent to ISO 800 Note that the recorded image is rather noisy (800 is displayed in red in the Monitor).
| Set standard sensitivity under normal situations. If the brightness is low, sensitivity |
AUTO | is automatically increased. In |
standard sensitivity is selected | |
| • When AUTO is selected and sensitivity is automatically adjusted in dark conditions, |
| the ISO sensitivity indication is displayed in the Control panel and Monitor. |
Canceling sensitivity setting
Select AUTO to cancel the sensitivity setting.
Detailed Operation
72 | 73 |