Nikon Coolpix 995 manual Shooting SET-UP Items only in mode Controls, Setting Func /2, Memorize

Setting Shooting SET-UP Menus—continuedShooting Mode

Shooting SET-UP Items (only in mode)

Controls

You can use the Controls setting to specify whether individual functions are retained in the camera or cleared from the camera’s memory when you turn the camera off. Various alternative functions can be selected and assigned to the FUNC. 1 (Exposure mode button) and FUNC. 2 (Exposure Compensation button).

Memorize	Memorizes the settings that remain in camera’s
	memory when the camera is turned off.
FUNC. 1	Pressing the MODE button activates the chosen
	alternate function.
FUNC. 2	Pressing the ≠ button activates the chosen alternate
	function.

— Memorize —

The Memorize determines what settings remain in effect when the camera is turned off.

Any items that are not checked will be restored to default settings when the camera is turned off.

	Memorizes the flash mode setting.
	Memorizes the Focus mode setting.
MODE	Memorizes the Exposure mode setting.
	Memorizes the Exposure Compensation setting.
Done	Completes the setting.

To check an item, or to remove a check mark from an item that has already been checked, highlight the item and press > on the Multi selector. Highlight “Done” and press > to put the change into effect.

130

— FUNC. 1/FUNC. 2 —

By default, the (FUNC.1) button controls exposure mode and the

(FUNC. 2) button controls exposure compensation. Using the FUNC. 1 and FUNC. 2 menus, you can assign different functions to

these buttons in mode.

Mode	Assigns Exposure mode operation.
	FUNC. 1 default.
	Assigns Focus mode (including Self-timer and
	Manual focus) operation.
	Assigns Flash mode and ISO sensitivity operation.

White Balance Assigns White Balance operation.

	Assigns Exposure Compensation operation.
	FUNC. 2 default.
Metering	Assigns Exposure Metering operation.

Check point

For even greater ease of use, when White Balance operation is assigned to the Exposure mode button or Exposure Compensation button using FUNC. 1 or FUNC. 2, rotating the Command dial while pressing the button changes the display so that PrE (White Bal Preset), Sun (Fine), Inc (Incandescent), Flu (Fluorescent), Clo (Cloudy) or FLa (Speedlight) appears with the W-BAL. (White Balance) indication on the Control panel.

Setting FUNC. 1/2

Press ≤/≥ on the Multi selector to highlight the selection and
1 press > to select. The Monitor returns to the SET-UP menu.
Press the MENU button to complete the setting. The assigned
2 function can now be activated using the FUNC. 1 (Exposure	Menus
mode) button or FUNC. 2 (Exposure Compensation) button.

• Operation after FUNC. 1 or 2 setting

Exposure mode, ISO Sensitivity,

White Balance, Exposure

Compensation, Exposure Metering

Focus mode

Flash mode

131