Nikon SB-102 instruction manual Nikon

Page 1

Nikon

NIKONOS Speedlighf

INSTRUCTION MANUAL

Image 1

Contents Nikon Exposure calculation dial NomenclatureContents Preparation ForewordPreparation O-rings and their sealing method PreparationTips on Speedlight Care Basic OPERATI,O..N~S.... =======~===~=----==-= Install the batteriesLock the buckle lockl Release latches Replace the battery chamber capLoosen the joint Knob Lock the bucklesBasic OPERATIONS-confinued Attach the cord Fastening hanger to the bracket Loosen the arm Knob @Attach the bracket To the arm Remove Camerasflash sync socket coverRemove the synchro Socket cover Set the shutter Speed on the camera Set the ASA/ISO film speedNon-TTL. Automatic Operation Wait for the ready Light to light Turn on the flash unitTurn off the flash unit Take the pictureBracket Controls in DETAIL~~-=~ksens~orun~itSU----101Controls in Detail Close-Up Shooting in the Non-TTL Automatic ModeJoint @ Sensor Socket Synchro SocketSynchronization Speed Sensor Unit SU-101 OptionalShooting Mode Selector TTL Automatic Flash Control Exposure Calculation DialTTL Auto Shooting Range Example Non-TTL Automatic Flash ControlManual Flash Control Guide Numbers in the Manual Mode Ready-Light Other Warning Functions Test FiringAttaching the SW-102 Cord Fastening Hanger @Wide-Flash Adapter SW-102 Target-Light FunctionMultiple Flash Photography Replacing the Target-lightDaylight Fill-In Flash Photography Tips on Speedlight Photography New batteries Polarity Optimum Battery PerformanceAccessories Mark AccessoriesModes SpecificationsNlro