Nikon SB-102 instruction manual Specifications, Modes

SPECIFICATIONS___ _____

Flash Type:	High-performance silicon-
	controlled rectifier and series
Useable Exposure	circuitry
	TTL auto exposure (with Nikonos-V
Modes:	camera) ; Non-TTL auto exposure
	(with optional Sensor Unit
	SU-101); and Manual : "MFULL,"
	"M1/4," and "M1/16" settings
Guide Numbers:	With ASAIISO 100 film on land
	(underwater), full output : 32 (16);
	1/4 output: 16 (8) ; 1/16 output :
	8(4)
Angle of Coverage :	79° on land ; covers picture angle
	of 28mm lens on land and under-
	water ; with Wide-Flash Adapter
	SW-102, picture angle increases
Batteries:	to that of a 15mm lens
	Six C-type NiCd batteries or six
	C-type alkaline-manganese
	batteries (high-performance
	manganese batteries not
	recommended)
Number of Flashesl	NiCd * : 70 flasheslminimum
Recycling Time:	approx. 5sec .*'(depending upon
	battery brand and amount of
	recharging)
	Alkaline-manganese : 120 flashesl
	minimum approx. 14 sec."
	• Data for C-type NiCd batteries
	are applicable only when bat-
	teries with a 1200mAh capacity
	have been recharged by a 120 mA
	current for 15 hours at room
	temperature.
	*. More flashes and shorter
	recycling times in the TTL,
	non-TTL,"M1/4, " and "M1/16"
	modes
Useable Ranges :	TTL : ASAIISO film speed coupling
	range : ASAIISO 25 to 400 ; useable
	aperture range : f/2 .8 to f/22 (at
	ASAIISO 100); coupling distance
	range : 0.3m (1ft) to 11 m (36.1ft)
	(at ASAIISO 100 on land); 0.3m
	(1 ft) to 5.6m (184ft) (at ASAIISO
	100 underwater)
	Non-TTL : Useable apertures : f/4
	and f/8 (at ASAIISO 100); coupling
	distance range : 0.6m (2ft) to 8m
	(26.2 ft) (at ASAIISO 100 and f/4
	on land) ; 0.6m (2ft) to 4m (131 ft)
	(at ASAIISO 100 and f/4 under-
	water) ; 0.6m (2ft) to 4m (13.1ft)
	(at ASAIISO 100 and f/8 on land);
	0.6m (2ft) to 2m (6.6ft) (at
	ASAIISO 100 and f/8 underwater)
Resistant Pressure:	6kg/cm 2 (85 Ib/in2) maximum ;
	useable to depths of 50m (160ft)
Target·Light :	Indicates direction of flash head
	when T-S switch is at "T.LlGHT"
	or "T&S"
Slave Flash Function :	Wireless; triggered by light from
	another flash unit when T-S switch
	is at " SLAVE " or " T&S"
Dimensions:	Flash head : Approx . 139 mm (W) x
	1525mm(H)x 212mm(D)
Weight :	Flash head without batteries :
	Approx . 1670g

Note: All performance data are for normal-temperature operation

{25°C (77 °F)J.

Supplied with ten items: Main flash head (including battery cartridge), joint, bracket (with separate bracket screw), cord fastening hanger, Wide Flash Adapter $W-102, O-ring set, target light, sync cord, arm, and speedlight case $$-101.

Subjec t to change without noti ce.

35