Nikon SB-102 instruction manual Accessories, Mark

Page 34

ACCESSORIES-continued_______

Double 5ync Cord

When using the Nikonos-V, this cord enables two S8 -102 Speedlights to be used in the TTL automatic flash mode .

When using two S8-102 Speedlights in the TTL automatic flash

mode, the correct shooting situation mark on the exposure calcula- tion dial must be realigned with a + 1higher speed on the ASAIISO film speed scale. For example, when using ASAIISO 100 film, align the correct shooting situation mark with ASAIISO 200. When you have finished using the two speedlights, realign the scale and

mark.

·If you decide to use only one speedlight in the TTL automatic flash mode, rea lign the ASAIISO film speed scale at its original setting and turn off the speedlight which is attached to the gray sync cord. Should you turn off the speedlight which is attached to the black cord, TTL automatic flash control is automatically canceled and the unit will fire at its maximum output regardless of the setting.

Non-TTL automatic flash exposure is not possible when using two speedlights connected by the optional Double Sync Cord.

5peedlight Case 55-101 (Provided)

Three cushioned compartments inside this stylish tote bag house the camera and all parts of the Nikonos Speedlight Unit S8 -102.

Protectors

Special protectors are available to prevent damage to the S8 -102 from inadvertent bumps.

O-rings and lubricant

Additional O-rings and lubricant are available to allow you to maintain the flash unit in perfect condition .

00

34

Image 34
Contents Nikon Nomenclature Exposure calculation dialContents Foreword PreparationPreparation Preparation O-rings and their sealing methodTips on Speedlight Care Install the batteries Basic OPERATI,O..N~S.... =======~===~=----==-=Loosen the joint Knob Replace the battery chamber capLock the buckle lockl Release latches Lock the bucklesBasic OPERATIONS-confinued Attach the bracket To the arm Loosen the arm Knob @Attach the cord Fastening hanger to the bracket Remove Camerasflash sync socket coverRemove the synchro Socket cover Set the ASA/ISO film speed Set the shutter Speed on the cameraNon-TTL. Automatic Operation Turn on the flash unit Wait for the ready Light to lightTake the picture Turn off the flash unitControls in DETAIL~~-=~ksens~orun~itSU----101 BracketControls in Detail Close-Up Shooting in the Non-TTL Automatic ModeJoint @ Synchro Socket Sensor SocketSensor Unit SU-101 Optional Synchronization SpeedShooting Mode Selector Exposure Calculation Dial TTL Automatic Flash ControlTTL Auto Shooting Range Non-TTL Automatic Flash Control ExampleManual Flash Control Guide Numbers in the Manual Mode Ready-Light Test Firing Other Warning FunctionsWide-Flash Adapter SW-102 Cord Fastening Hanger @Attaching the SW-102 Target-Light FunctionMultiple Flash Photography Replacing the Target-lightDaylight Fill-In Flash Photography Tips on Speedlight Photography Optimum Battery Performance New batteries PolarityAccessories Accessories MarkSpecifications ModesNlro