Operating Your Camera
Shutter Speed Control
You can control brightness of the screen by the shutter speed. You can select the automatic control and ‘OFF’ (1/60 or 1/50sec. fixed) mode, Flickerless and manual control of the shutter.
1.Press the SET button to display the setup menu and move the arrow indicator to ‘Shutter’ using the UP or DOWN button
Operating Your Camera
5.Manual
You can select speed from 1/60 to 1/10,000sec. (NTSC mode), 1/50 to
1/10,000sec. (PAL mode)
Setup
| Setup |
Camera ID | OFF |
BLC | OFF |
Lens | DC |
Shutter1/250
Press SET to Return
Change the range using the LEFT or RIGHT button. (1/60, 1/50~1/10,000)
Shutter | OFF |
Gain | AGC |
White Balance | ATW |
Motion Detect | OFF |
Color | AUTO |
Sync. | INT |
Reset |
|
End |
|
Select “Shutter” to the desired mode like ESC, OFF, FLKless or Manual using the LEFT or RIGHT button
When the shutter speed is increased or decreased using the LEFT or RIGHT button, you can find the difference by monitoring the brightness of the screen.
2.ESC selected
The electronic shutter can be automatically controlled from 1/60(1/50) to 1/10,000sec.
The brightness can be controlled.
If Auto Iris Lens is mounted and adjusted, ESC mode cannot be selected.
3.OFF selected
The shutter speed is fixed at 1/60(1/50)sec.
4.FLKless selected
The speed is fixed at 1/100sec. in NTSC mode and at 1/120sec. in PAL mode. This should be selected when flickering is caused by discord of environmental lighting and frequency
Day&Night Color CCD Camera | 24 |
25 | Day&Night Color CCD Camera |