Mace CAM91 manual Precautions, To be stained by fingerprint

Page 4

Precautions

Do not install the camera in

Do not drop the camera or

extreme temperature conditions.

subject them to physical shocks.

Do not touch the front lens of

Do not expose the camera to

the camera.

rain or spill beverage on it.

Only use the camera under conditions where temperatures are between -10 and 50 .

Be especially careful to provide ventilation when operating under high temperatures.

It can cause malfunctions to occur.

It is one of the most important

 

If it gets wet, wipe it dry immediately.

parts of the camera. Be careful not

 

Liquids can contain minerals that

to be stained by fingerprint.

 

corrode the electronic components.

 

Do not install the camera under

Never keep the camera face to

unstable lighting conditions

strong light directly.

Severe lighting change or flicker can

It can damage the CCD.

cause the camera to work improperly.

 

Day&Night Color CCD Camera

6

7

Day&Night Color CCD Camera

Image 4
Contents Day & Night Color CCD Camera Explanation of graphical symbols Features Precautions To be stained by fingerprintContents Front Name and Function of Each PartBottom Accessories BackInstallation Method Installing Auto Iris LensLens Attach the lens to the camera by turning clockwiseInstalling C/CS-Mount Lens Connecting to MonitorConnecting to Power Mounting a CS-Mount LensOperating Your Camera Camera ID Press SET buttonAccording to status of this selection switch Back Light Compensation BLCLens Selection Performance, the level ‘10’ is recommendedShutter Speed Control Gain Control White Balance ControlAWC Auto White Balance Control Focused on white paperManual PosiTips on using Motion Detection Color Day & NightSynchronization Mode Color Point 1~5Using Remote Jack ResetRemote Control on Setup Setup menu Command ByteExternal Connecting Terminal SpecificationDay/Night External Signal Input/Motion Detect Output At NEGANegativemodeTroubleshooting Problem Solution