Operating Your Camera
Gain Control
You can see a brighter picture at low light level. Increasing the gain level, you will see the noise increased although the picture gets brighter.
1.Press the SET button to display the setup menu and move the arrow indicator to ‘Gain’ using the UP or DOWN button
Operating Your Camera
White Balance Control
You can use this when the screen color needs to be controlled.
1.Press the SET button to display Setup menu and move the arrow indicator to ‘White Balance’ using the UP or DOWN button
| Setup |
|
|
|
|
|
| Camera ID | OFF |
|
|
| |
| BLC | OFF |
|
|
| |
| Lens | DC |
|
|
| |
| Shutter | OFF |
|
|
| |
| Gain | AGC |
|
|
| Select AGC or OFF using the LEFT or |
| White Balance | ATW |
|
| RIGHT button | |
| Motion Detect | OFF |
|
|
| |
| Color | AUTO |
|
|
| |
| Sync. | INT |
|
|
| |
| Reset |
|
|
|
|
|
| End |
|
|
|
|
|
Setup |
|
Camera ID | OFF |
BLC | OFF |
Lens | DC |
Shutter | OFF |
Gain | AGC |
White Balance | ATW |
Motion Detect | OFF |
Color | AUTO |
Sync. | INT |
Reset |
|
End |
|
Select ATW, AWC or Manual using the LEFT or RIGHT button
2. You can control the Gain level at AGC selected.
2. The three white balance control modes are as follows : |
ATW (Auto Trace White Balance ) |
The camera automatically controls the white balance in any environment |
AWC ( Auto White Balance Control ) |
Gain Limit | Middle |
Press SET to Return
Caution.
Low/Middle/High
The white balance is automatically adjusted in a specific environment. |
In order to obtain the best result, press the SET button while the camera |
focused on white paper. |
If the environment including the light source is changed, you have to adjust |
the white balance again. |
When Gain Limit is set to Low, screen noise will decrease but resolution decrease.
When Gain Limit is set to High, resolution will increase but screen noise will increase.
Day&Night Color CCD Camera | 26 |
27 | Day&Night Color CCD Camera |