Yamaha RX-V657 owner manual Front terminals, Center terminals, Surround terminals, Subwoofer jack

Page 16

SPEAKER SETUP

■FRONT terminals

Connect one or two speaker systems (6, 7) to these terminals. If you use only one speaker system, connect it to the FRONT A or B terminals.

■CENTER terminals

Connect a center speaker (8) to these terminals.

■SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

■SUBWOOFER jack

Connect a subwoofer with built-in amplifier (1), such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

■SURROUND BACK terminals

Connect surround back speakers (9, 10) to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals.

■PRESENCE terminals

Connect presence speakers (2, 3) to these terminals.

*If you are using either the U.S.A., Canada, Australia, U.K. or Europe model, you can also use these speakers as Zone 2 speakers (see page 71).

		2
3		6
		6
		8
	7	1	4
		1

			9
		5	1 0
		5
		Speaker layout

Image 16

Contents RX-V657 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 7-channel power amplifierSound field features Other featuresGetting Started Supplied accessoriesSlide the cover back until it snaps into place Controls and Functions Front panelVolume PRESET/TUNING EditInput Mode Speakers A/BRemote control Using the remote control Front panel display Sleep indicator 96/24 indicatorLFE indicator Input channel indicatorsRear panel AC Outlets Speaker Setup Speaker placement10 mm Speaker connectionsRed positive + Black negative Subwoofer System Presence speakers Right LeftRight Left Front speakers a CenterFront terminals Center terminalsSurround terminals Subwoofer jackBefore connecting components ConnectionsConnections for DVD playback Connecting video componentsVideo Monitor For 6-channel input Connecting to the Multi CH Input jacksExternal decoder Connections for other video components Video AUX jacks on the front panelDVD recorder Or VCRConnecting audio components Connections for audio componentsMD recorder or Tape deck CD playerConnecting to an external amplifier Front PRE OUT jacksSurround PRE OUT jacks Center PRE OUT jackConnecting the FM and AM antennas Insert the cable Wire into the slotClamp it with Pliers Snap the cover into placeConnecting the power supply cord Connecting the AC power cordAC Outlets Switched Memory back-upSpeaker impedance setting Turning on the powerAuto Setup Introduction Optimizer microphone setupChecks and adjusts the sound level volume of each speaker Optimizer microphone positionStarting the setup AutomenuAutocheck ResultexitError Press j / i to switch between warning messages For details about each message, seeTroubleshooting for auto setup procedure Before auto setup Errors during auto setup1OUT of Phase 3LEVEL Error2OVER 24m Cause RemedyAdjust the volume to the desired output level PlaybackBasic operations Select the input sourceTo adjust the tone To listen with headphones SilentSelect a sound field program if desired CinemaSelecting sound field programs Selecting Multi CH InputFront panel operation Playing video sources BackgroundRemote control operation Enjoying multi-channel softwareAuto Auto Decoders select with jPress Select on the remote control to select the decoder When you select the SUR. Standard programWhen you select the SUR. Enhanced or Movie Theater program Enjoying 2-channel software in surroundIndicator around the front panel button lights up To cancel, press Pure Direct againThis adjusts the level of compression Listening to high fidelity stereo soundSelecting input modes Information about the input signal Press u / d to display the followingDisplaying information about the input SourceFM/AM Tuning Automatic and manual tuningPress PRESET/TUNING l / h once to begin automatic tuning Press FM/AM to select the reception bandPresetting stations Manual tuningAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsPress and hold Memory MAN’L/AUTO FM for more than 3 seconds Tune into a stationSelecting preset stations Preset numberShows the displayed station has been stored as C3 Repeat steps 1 to 5 to store other stationsExchanging preset stations Select preset station E1See Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving Radio Data System stations PTY Changing the Radio Data System modeFrequency display PTY Seek function Lights up Remote controlSelected program type appears in the front panel display To cancel this function EON functionSpecial considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesStereo MusicSpectacle Sci-FiAdventure GeneralFor music sources EntertainmentSUR. Standard SUR. EnhancedAdvanced Operations Selecting the OSD mode Using the sleep timerP04 Movie Theater Manually adjusting speaker levels Canceling the sleep timerPress j / i to adjust the speaker output level Press Enter when you have completed your adjustmentAuto Setup Manual SetupSET Menu Sound MenuSignal Info Option MenuUsing SET Menu Press u / d to select Manual SetupPress Enter to enter Manual Setup To exit, press SET Menu when finishedSound Menu 1/2 Front SPCenter SP SUR. L/R SPLFE/BASS OUT SUR. B L/R SPPresence SP 02ASUBWOOFER Phase Subwoofer phase Subwoofer PhasePriority Presence/Surround back channel priorityCSP Distance DequalizerElfe Level Gaudio SETFdynamic Range Input Menu CMPNT-V InputOptical OUT OpticalBinput Mode Input mode Binput ModeVolume Trim Dvolume Trim Cinput RenameAdisplay SET Option MenuBmemory Guard Speaker B setting SP B CPARAM. INIDmulti Zone SET Parameter initialization CPARAM. INIAdvanced Setup menu is displayed in the front panel display Advanced Setup MenuPress STANDBY/ON to confirm your selection Advanced Setup menu items Factory presets PresetSpeaker impedance SP IMP Remote RemoteControlling this unit Component control areaRemote Control Code Default Settings Setting remote control codesTransmit indicator on the remote control flashes twice Controlling other components DVD playerDigital TV LD player CD player TunerClearing set up remote control codes Switching library codesEnter the code number Zone System configuration and connections exampleZone 2 connections Remote controlling Zone Using this unit’s internal amplifierTo control Zone Press to set the remote control to Zone Second room This unitTo turn on all units the main unit and Zone 2 unit Special considerations for DTS softwareFor DVDs encoded in DTS For CDs encoded in DTSWhat is a sound field Changing parameter settings Editing Sound Field ParametersPress u / d to select Resetting parameters to the factory PresetsPress j / i to change Parameter value INIT. DLY/P. INIT. DLY Initial delay Sound Field Parameter DescriptionsDSP Level DSP level Room SIZE/P. Room Size Room sizeINIT. DLY Surround initial delay SB INI. DLY Surround back initial delayLiveness Liveness Room Size Surround room sizeREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level Dimension Dimension DIALG.LIFT Dialog liftFor 2ch Stereo Direct Direct For 7ch StereoControl range 0 to Initial setting For DTS Neo6 Music Image Center imageTroubleshooting GeneralProblem Cause Remedy Refer to Sound suddenly Goes offOnly the speaker on One side can beProblem Cause Remedy Refer to Dolby Digital or DTS Or DTS indicator onVolume level Sources cannot beTuner Remote control Problem Cause Remedy Refer to Remote controlDoes not work nor Function properlyResetting the Factory Presets Glossary Audio formatsSound field programs Audio informationCinema DSP Silent CinemaVideo signal information Component video signalComposite video signal Video signalSpecifications APPENDIX-i APPENDIX-ii APPENDIX-iii APPENDIX-iv APPENDIX-v WE60030