Yamaha RX-V657 owner manual Sur. B L/R Sp, Lfe/Bass Out, Presence SP

Page 59

Surround back speakers SUR. B L/R SP

Choices: LRGx2, LRGx1, SMLx2, SMLx1, NONE

SUR. B L/R SP

)SMLx2

•Select LRGx1 if you have a large surround back speaker. The unit directs the entire range of the surround back channel signal to the left surround back speaker.

•Select LRGx2 if you have 2 large surround back speakers. The unit directs the entire range of the surround back channel signal to the surround back speakers.

•Select SMLx2 if you have 2 small surround back speakers. The low-frequency signals of the surround back channels are directed to the speakers selected with “LFE/BASS OUT”.

•Select SMLx1 if you have a small surround back speaker. The low-frequency signals of the surround back channel are directed to the speakers selected with “LFE/BASS OUT”, and the rest of the frequency signals are directed to the left surround back speaker.

•Select NONE if you do not have a surround back speaker. The unit directs all of the surround back channel signal to the surround left and right speakers.

Note

If you select SMLx1 or LRGx1, connect the speaker to the left SURROUND BACK speaker terminals.

Presence speakers PRESENCE SP

Choices: YES, NONE

SET MENU

Bass out LFE/BASS OUT

Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right speakers according to the characteristics of your system. This setting also determines the routing of the LFE (low- frequency effect) signals found in Dolby Digital or DTS sources.

Choices: SWFR, FRNT, BOTH

LFE/BASS OUT

)BOTH

•Select SWFR if you connect a subwoofer. LFE and low-frequency signals from other channels are directed to the subwoofer according to the speaker settings.

•Select FRNT if you do not use a subwoofer. LFE and low frequency signals from other channels are directed to the front speakers according to the speaker settings (even if you have previously set front speakers to SML).

•Select BOTH if you connect a subwoofer and you want to output low-frequency signals from front channels to both the front speakers and subwoofer. LFE and low- frequency signals from other channels are also directed to the subwoofer according to the speaker settings. Use this function to reinforce low-frequency signals using the subwoofer when playing back sources such as CDs.

Cross over CROSS OVER

Use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency will be sent to the subwoofer. Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

PRESENCE SP

CROSS OVER

)NONE

;;;80Hz

•Select YES if you have presence speakers.

•Select NONE if you do not have presence speakers.

y

When YES is selected, the unit automatically adjusts the dialog lift parameter. To adjust it manually, see page 79.

English

57

Page 58 Page 60
Image 59
Page 58 Page 60
Contents RX-V657 Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 7-channel power amplifier Sound field featuresSlide the cover back until it snaps into place Supplied accessoriesGetting Started Front panel Controls and FunctionsSpeakers A/B VolumePRESET/TUNING Edit Input ModeRemote control Using the remote control Front panel display Input channel indicators Sleep indicator96/24 indicator LFE indicatorAC Outlets Rear panelSpeaker placement Speaker SetupRed positive + Black negative Speaker connections10 mm Center Subwoofer System Presence speakersRight Left Right Left Front speakers aSubwoofer jack Front terminalsCenter terminals Surround terminalsConnections Before connecting componentsVideo Monitor Connecting video componentsConnections for DVD playback External decoder Connecting to the Multi CH Input jacksFor 6-channel input Or VCR Connections for other video componentsVideo AUX jacks on the front panel DVD recorderCD player Connecting audio componentsConnections for audio components MD recorder or Tape deckCenter PRE OUT jack Connecting to an external amplifierFront PRE OUT jacks Surround PRE OUT jacksSnap the cover into place Connecting the FM and AM antennasInsert the cable Wire into the slot Clamp it with PliersMemory back-up Connecting the power supply cordConnecting the AC power cord AC Outlets SwitchedTurning on the power Speaker impedance settingOptimizer microphone position Auto SetupIntroduction Optimizer microphone setup Checks and adjusts the sound level volume of each speakerResultexit Starting the setupAutomenu AutocheckError For details about each message, see Press j / i to switch between warning messagesErrors during auto setup Troubleshooting for auto setup procedure Before auto setupCause Remedy 1OUT of Phase3LEVEL Error 2OVER 24mSelect the input source Adjust the volume to the desired output levelPlayback Basic operationsCinema To adjust the toneTo listen with headphones Silent Select a sound field program if desiredPlaying video sources Background Selecting sound field programsSelecting Multi CH Input Front panel operationDecoders select with j Remote control operationEnjoying multi-channel software Auto AutoEnjoying 2-channel software in surround Press Select on the remote control to select the decoderWhen you select the SUR. Standard program When you select the SUR. Enhanced or Movie Theater programListening to high fidelity stereo sound Indicator around the front panel button lights upTo cancel, press Pure Direct again This adjusts the level of compressionSelecting input modes Source Information about the input signalPress u / d to display the following Displaying information about the inputPress FM/AM to select the reception band FM/AM TuningAutomatic and manual tuning Press PRESET/TUNING l / h once to begin automatic tuningPress FM/AM to select the FM band Presetting stationsManual tuning Automatically presetting FM stationsTune into a station Manually presetting stationsAutomatic preset tuning options Press and hold Memory MAN’L/AUTO FM for more than 3 secondsRepeat steps 1 to 5 to store other stations Selecting preset stationsPreset number Shows the displayed station has been stored as C3Press and hold PRESET/TUNING Edit for more than 3 seconds Exchanging preset stationsSelect preset station E1 See Selecting preset stationsReceiving Radio Data System stations Frequency display Changing the Radio Data System modePTY Selected program type appears in the front panel display Lights up Remote controlPTY Seek function EON function To cancel this functionRecording Special considerations when recording DTS softwareMusic Sound Field Program DescriptionsFor movie/video sources StereoGeneral SpectacleSci-Fi AdventureSUR. Enhanced For music sourcesEntertainment SUR. StandardP04 Movie Theater Selecting the OSD mode Using the sleep timerAdvanced Operations Press Enter when you have completed your adjustment Manually adjusting speaker levelsCanceling the sleep timer Press j / i to adjust the speaker output levelSound Menu Auto SetupManual Setup SET MenuOption Menu Signal InfoTo exit, press SET Menu when finished Using SET MenuPress u / d to select Manual Setup Press Enter to enter Manual SetupSUR. L/R SP Sound Menu 1/2Front SP Center SPPresence SP SUR. B L/R SPLFE/BASS OUT Presence/Surround back channel priority 02ASUBWOOFER PhaseSubwoofer phase Subwoofer Phase PriorityDequalizer CSP DistanceFdynamic Range Gaudio SETElfe Level Optical Input MenuCMPNT-V Input Optical OUTCinput Rename Binput ModeInput mode Binput Mode Volume Trim Dvolume TrimBmemory Guard Option MenuAdisplay SET Parameter initialization CPARAM. INI Speaker B setting SP BCPARAM. INI Dmulti Zone SETPress STANDBY/ON to confirm your selection Advanced Setup MenuAdvanced Setup menu is displayed in the front panel display Remote Remote Advanced Setup menu itemsFactory presets Preset Speaker impedance SP IMPComponent control area Controlling this unitTransmit indicator on the remote control flashes twice Setting remote control codesRemote Control Code Default Settings Tuner Controlling other componentsDVD player Digital TV LD player CD playerEnter the code number Switching library codesClearing set up remote control codes Zone 2 connections System configuration and connections exampleZone Second room This unit Remote controlling ZoneUsing this unit’s internal amplifier To control Zone Press to set the remote control to ZoneFor CDs encoded in DTS To turn on all units the main unit and Zone 2 unitSpecial considerations for DTS software For DVDs encoded in DTSEditing Sound Field Parameters What is a sound field Changing parameter settingsPress j / i to change Parameter value Resetting parameters to the factory PresetsPress u / d to select Room SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions DSP Level DSP levelRoom Size Surround room size INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Liveness LivenessREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time For 7ch Stereo Dimension DimensionDIALG.LIFT Dialog lift For 2ch Stereo Direct DirectFor DTS Neo6 Music Image Center image Control range 0 to Initial settingGeneral TroubleshootingOne side can be Problem Cause Remedy Refer to Sound suddenlyGoes off Only the speaker onSources cannot be Problem Cause Remedy Refer to Dolby Digital or DTSOr DTS indicator on Volume levelTuner Function properly Remote controlProblem Cause Remedy Refer to Remote control Does not work norResetting the Factory Presets Audio formats GlossarySilent Cinema Sound field programsAudio information Cinema DSPVideo signal Video signal informationComponent video signal Composite video signalSpecifications APPENDIX-i APPENDIX-ii APPENDIX-iii APPENDIX-iv APPENDIX-v WE60030

RX-V657 specifications

The Yamaha RX-V657 is a versatile and robust AV receiver, designed to cater to both audiophiles and casual listeners alike. Released in the mid-2000s, this model quickly became popular due to its impressive feature set and solid performance, making it an excellent choice for home theater enthusiasts.

One of the standout features of the RX-V657 is its ability to deliver 6.1 channel surround sound. This receiver supports various audio formats, including Dolby Digital EX and DTS-ES, allowing it to immerse listeners in multi-dimensional soundscapes. Users can enjoy their favorite movies, music, and games with enhanced depth and clarity, ensuring an engaging audio experience.

The RX-V657 is equipped with Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts the speaker settings accordingly, optimizing the sound output based on the specific environment. This ensures that you achieve the best possible sound quality, regardless of your room's shape or furnishings.

Another notable aspect of the RX-V657 is its connectivity options. The receiver comes with multiple HDMI inputs, allowing for easy integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. It also features legacy connections like component and composite video inputs, making it compatible with older equipment as well. Additionally, the inclusion of an FM/AM tuner ensures that users can enjoy traditional radio broadcasts.

The RX-V657 includes a variety of audio processing features, such as Yamaha's cinema DSP. This technology recreates the acoustic characteristics of famous concert halls and cinema environments, enhancing the listening experience for music and movie fans alike. The receiver supports multiple sound fields, giving users the flexibility to choose the optimal setting for their content.

In terms of power, the RX-V657 delivers a solid performance with 100 watts per channel. This wattage ensures that it can drive a wide range of speakers, providing sufficient power for both small and larger home theater setups. The RX-V657 also incorporates a high dynamic power capability, which improves performance during demanding audio passages.

The design of the RX-V657 reflects Yamaha’s commitment to quality, featuring a sleek, modern aesthetic with a user-friendly front panel. The intuitive layout of controls, along with a well-organized display, enhances the overall user experience, making it easy to navigate through various settings and features.

In conclusion, the Yamaha RX-V657 is a feature-rich AV receiver that combines advanced audio technologies with practical connectivity options. It caters to the needs of both casual listeners and dedicated audio enthusiasts, making it a valuable addition to any home theater system. Its blend of performance, versatility, and ease of use positions it as a highly regarded model in Yamaha's lineup.
Top Page Image Contents