Yamaha RX-V657 owner manual Using the remote control

Page 9

BSLEEP

Sets the sleep timer.

CMULTI CH IN

Selects multi-channel input when using an external decoder (etc.).

DAMP

Selects the AMP mode. You must select the AMP mode to control the main unit.

EVOLUME +/–

Increases or decreases the volume level.

FMUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

GNIGHT

Turns on or off the night listening modes (see page 35).

HSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

ISET MENU

Activates the SET MENU function.

JRadio Data System tuning buttons

FREQ/TEXT

Press this button when the unit is receiving a Radio Data System station to cycle the display between the PS mode, PTY mode, RT mode, CT mode (if the station offers those Radio Data System data services) and/or the frequency display (see page 44).

PTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode (see page 45).

PTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode (see page 45).

EON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically (see page 46).

CONTROLS AND FUNCTIONS

Using the remote control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

3030 Approximately 6 m

■Handling the remote control

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperature, such as near a heater or stove

–extremely low temperatures

–dusty places

INTRODUCTION

English

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RX-V657 Special Instructions for U.K. Model For U.K. customersContents Built-in 7-channel power amplifier FeaturesSound field features Other featuresSupplied accessories Getting StartedSlide the cover back until it snaps into place Front panel Controls and FunctionsPRESET/TUNING Edit VolumeInput Mode Speakers A/BRemote control Using the remote control Front panel display 96/24 indicator Sleep indicatorLFE indicator Input channel indicatorsAC Outlets Rear panelSpeaker placement Speaker SetupSpeaker connections 10 mmRed positive + Black negative Right Left Subwoofer System Presence speakersRight Left Front speakers a CenterCenter terminals Front terminalsSurround terminals Subwoofer jackConnections Before connecting componentsConnecting video components Connections for DVD playbackVideo Monitor Connecting to the Multi CH Input jacks For 6-channel inputExternal decoder Video AUX jacks on the front panel Connections for other video componentsDVD recorder Or VCRConnections for audio components Connecting audio componentsMD recorder or Tape deck CD playerFront PRE OUT jacks Connecting to an external amplifierSurround PRE OUT jacks Center PRE OUT jackInsert the cable Wire into the slot Connecting the FM and AM antennasClamp it with Pliers Snap the cover into placeConnecting the AC power cord Connecting the power supply cordAC Outlets Switched Memory back-upTurning on the power Speaker impedance settingIntroduction Optimizer microphone setup Auto SetupChecks and adjusts the sound level volume of each speaker Optimizer microphone positionAutomenu Starting the setupAutocheck ResultexitError For details about each message, see Press j / i to switch between warning messagesErrors during auto setup Troubleshooting for auto setup procedure Before auto setup3LEVEL Error 1OUT of Phase2OVER 24m Cause RemedyPlayback Adjust the volume to the desired output levelBasic operations Select the input sourceTo listen with headphones Silent To adjust the toneSelect a sound field program if desired CinemaSelecting Multi CH Input Selecting sound field programsFront panel operation Playing video sources BackgroundEnjoying multi-channel software Remote control operationAuto Auto Decoders select with jWhen you select the SUR. Standard program Press Select on the remote control to select the decoderWhen you select the SUR. Enhanced or Movie Theater program Enjoying 2-channel software in surroundTo cancel, press Pure Direct again Indicator around the front panel button lights upThis adjusts the level of compression Listening to high fidelity stereo soundSelecting input modes Press u / d to display the following Information about the input signalDisplaying information about the input SourceAutomatic and manual tuning FM/AM TuningPress PRESET/TUNING l / h once to begin automatic tuning Press FM/AM to select the reception bandManual tuning Presetting stationsAutomatically presetting FM stations Press FM/AM to select the FM bandAutomatic preset tuning options Manually presetting stationsPress and hold Memory MAN’L/AUTO FM for more than 3 seconds Tune into a stationPreset number Selecting preset stationsShows the displayed station has been stored as C3 Repeat steps 1 to 5 to store other stationsSelect preset station E1 Exchanging preset stationsSee Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving Radio Data System stations Changing the Radio Data System mode PTYFrequency display Lights up Remote control PTY Seek functionSelected program type appears in the front panel display EON function To cancel this functionRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsStereo MusicSci-Fi SpectacleAdventure GeneralEntertainment For music sourcesSUR. Standard SUR. EnhancedSelecting the OSD mode Using the sleep timer Advanced OperationsP04 Movie Theater Canceling the sleep timer Manually adjusting speaker levelsPress j / i to adjust the speaker output level Press Enter when you have completed your adjustmentManual Setup Auto SetupSET Menu Sound MenuOption Menu Signal InfoPress u / d to select Manual Setup Using SET MenuPress Enter to enter Manual Setup To exit, press SET Menu when finishedFront SP Sound Menu 1/2Center SP SUR. L/R SPSUR. B L/R SP LFE/BASS OUTPresence SP Subwoofer phase Subwoofer Phase 02ASUBWOOFER PhasePriority Presence/Surround back channel priorityDequalizer CSP DistanceGaudio SET Elfe LevelFdynamic Range CMPNT-V Input Input MenuOptical OUT OpticalInput mode Binput Mode Binput ModeVolume Trim Dvolume Trim Cinput RenameOption Menu Adisplay SETBmemory Guard CPARAM. INI Speaker B setting SP BDmulti Zone SET Parameter initialization CPARAM. INIAdvanced Setup Menu Advanced Setup menu is displayed in the front panel displayPress STANDBY/ON to confirm your selection Factory presets Preset Advanced Setup menu itemsSpeaker impedance SP IMP Remote RemoteComponent control area Controlling this unitSetting remote control codes Remote Control Code Default SettingsTransmit indicator on the remote control flashes twice DVD player Controlling other componentsDigital TV LD player CD player TunerSwitching library codes Clearing set up remote control codesEnter the code number System configuration and connections example ZoneZone 2 connections Using this unit’s internal amplifier Remote controlling ZoneTo control Zone Press to set the remote control to Zone Second room This unitSpecial considerations for DTS software To turn on all units the main unit and Zone 2 unitFor DVDs encoded in DTS For CDs encoded in DTSEditing Sound Field Parameters What is a sound field Changing parameter settingsResetting parameters to the factory Presets Press u / d to selectPress j / i to change Parameter value Sound Field Parameter Descriptions INIT. DLY/P. INIT. DLY Initial delayDSP Level DSP level Room SIZE/P. Room Size Room sizeSB INI. DLY Surround back initial delay INIT. DLY Surround initial delayLiveness Liveness Room Size Surround room sizeREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level DIALG.LIFT Dialog lift Dimension DimensionFor 2ch Stereo Direct Direct For 7ch StereoFor DTS Neo6 Music Image Center image Control range 0 to Initial settingGeneral TroubleshootingGoes off Problem Cause Remedy Refer to Sound suddenlyOnly the speaker on One side can beOr DTS indicator on Problem Cause Remedy Refer to Dolby Digital or DTSVolume level Sources cannot beTuner Problem Cause Remedy Refer to Remote control Remote controlDoes not work nor Function properlyResetting the Factory Presets Audio formats GlossaryAudio information Sound field programsCinema DSP Silent CinemaComponent video signal Video signal informationComposite video signal Video signalSpecifications APPENDIX-i APPENDIX-ii APPENDIX-iii APPENDIX-iv APPENDIX-v WE60030

RX-V657 specifications

The Yamaha RX-V657 is a versatile and robust AV receiver, designed to cater to both audiophiles and casual listeners alike. Released in the mid-2000s, this model quickly became popular due to its impressive feature set and solid performance, making it an excellent choice for home theater enthusiasts.

One of the standout features of the RX-V657 is its ability to deliver 6.1 channel surround sound. This receiver supports various audio formats, including Dolby Digital EX and DTS-ES, allowing it to immerse listeners in multi-dimensional soundscapes. Users can enjoy their favorite movies, music, and games with enhanced depth and clarity, ensuring an engaging audio experience.

The RX-V657 is equipped with Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts the speaker settings accordingly, optimizing the sound output based on the specific environment. This ensures that you achieve the best possible sound quality, regardless of your room's shape or furnishings.

Another notable aspect of the RX-V657 is its connectivity options. The receiver comes with multiple HDMI inputs, allowing for easy integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. It also features legacy connections like component and composite video inputs, making it compatible with older equipment as well. Additionally, the inclusion of an FM/AM tuner ensures that users can enjoy traditional radio broadcasts.

The RX-V657 includes a variety of audio processing features, such as Yamaha's cinema DSP. This technology recreates the acoustic characteristics of famous concert halls and cinema environments, enhancing the listening experience for music and movie fans alike. The receiver supports multiple sound fields, giving users the flexibility to choose the optimal setting for their content.

In terms of power, the RX-V657 delivers a solid performance with 100 watts per channel. This wattage ensures that it can drive a wide range of speakers, providing sufficient power for both small and larger home theater setups. The RX-V657 also incorporates a high dynamic power capability, which improves performance during demanding audio passages.

The design of the RX-V657 reflects Yamaha’s commitment to quality, featuring a sleek, modern aesthetic with a user-friendly front panel. The intuitive layout of controls, along with a well-organized display, enhances the overall user experience, making it easy to navigate through various settings and features.

In conclusion, the Yamaha RX-V657 is a feature-rich AV receiver that combines advanced audio technologies with practical connectivity options. It caters to the needs of both casual listeners and dedicated audio enthusiasts, making it a valuable addition to any home theater system. Its blend of performance, versatility, and ease of use positions it as a highly regarded model in Yamaha's lineup.
Top Page Image Contents