Yamaha RX-V657 Problem Cause Remedy Refer to Sound suddenly, Goes off, Only the speaker on, Heard

Page 84

TROUBLESHOOTING

Problem

Cause

Remedy

Refer to

page

 

 

 

 

 

 

 

The sound suddenly

The protection circuitry has been activated

Check that the impedance selector setting is correct.

66

goes off.

because of a short circuit, etc.

Check that the speaker wires are not touching each

—

 

 

 

 

other and then turn this unit back on.

 

 

The sleep timer has turned the unit off.

Turn on the power, and play the source again.

—

 

 

 

 

 

The sound is muted.

Press MUTE to cancel a mute.

31

 

 

 

 

Only the speaker on

Incorrect cable connections.

Connect the cables properly. If the problem persists,

12

one side can be

 

the cables may be defective.

 

heard.

Incorrect balance settings in SET MENU.

Adjust the SPEAKER LEVEL settings.

58

 

Only the center

When playing a monaural source with a

 

 

speaker outputs

CINEMA DSP program, the source signal

 

 

substantial sound.

is directed to the center channel, and the

 

 

 

front and surround speakers output effect

 

 

 

sounds.

 

 

No sound from the

The sound field programs are turned off.

Press STRAIGHT (EFFECT) to turn them on.

36

effect speakers.

You are using a source or program

Try another sound field program.

48

 

 

combination that does not output sound

 

 

 

from all channels.

 

 

No sound from the

The output level of the center speaker is

Raise the level of the center speaker.

58

center speaker.

set to minimum.

 

 

 

“CENTER SP” in SET MENU is set to

Select the appropriate setting for the center speaker.

56

 

NONE.

 

 

 

One of the HiFi DSP programs (except for

Try another sound field program.

48

 

7ch Stereo) has been selected.

 

 

No sound from the

The output level of the surround speakers

Raise the output level of the surround speakers.

58

surround speakers.

is set to minimum.

 

 

 

“SUR. L/R SP” in SET MENU is set to

Select the appropriate setting for the surround left and

56

 

NONE.

right speakers.

 

 

A monaural source is being played with

Press STRAIGHT (EFFECT) to turn on the sound

—

 

STRAIGHT.

fields.

 

No sound from the

Surround back speakers are not selected.

Select surround back speakers in SUR. B L/R SP.

57

surround back

“SUR. L/R SP” in SET MENU is set to

If the surround left and right speakers are set to

56

speakers.

 

NONE.

NONE, the surround back speaker setting is

 

 

 

automatically set to NONE. Select the appropriate

 

 

 

setting for the surround speakers.

 

 

 

 

 

 

“SUR. B L/R SP” in SET MENU is set to

Select LRGx1 or SMLx1.

57

 

NONE.

 

 

No sound from the

“LFE/BASS OUT” in SET MENU is set

Select SWFR or BOTH.

57

subwoofer.

to FRNT when a Dolby Digital or DTS

 

 

 

signal is being played.

 

 

 

“LFE/BASS OUT” in SET MENU is set

Select BOTH.

57

 

to SWFR or FRNT when a 2-channel

 

 

 

source is being played.

 

 

 

 

 

 

 

The source does not contain low bass

 

 

 

signals.

 

 

82

Page 83 Page 85
Image 84
Page 83 Page 85
Contents RX-V657 For U.K. customers Special Instructions for U.K. ModelContents Features Built-in 7-channel power amplifierSound field features Other featuresSupplied accessories Getting StartedSlide the cover back until it snaps into place Controls and Functions Front panelVolume PRESET/TUNING EditInput Mode Speakers A/BRemote control Using the remote control Front panel display Sleep indicator 96/24 indicatorLFE indicator Input channel indicatorsRear panel AC OutletsSpeaker Setup Speaker placementSpeaker connections 10 mmRed positive + Black negative Subwoofer System Presence speakers Right LeftRight Left Front speakers a CenterFront terminals Center terminalsSurround terminals Subwoofer jackBefore connecting components ConnectionsConnecting video components Connections for DVD playbackVideo Monitor Connecting to the Multi CH Input jacks For 6-channel inputExternal decoder Connections for other video components Video AUX jacks on the front panelDVD recorder Or VCRConnecting audio components Connections for audio componentsMD recorder or Tape deck CD playerConnecting to an external amplifier Front PRE OUT jacksSurround PRE OUT jacks Center PRE OUT jackConnecting the FM and AM antennas Insert the cable Wire into the slotClamp it with Pliers Snap the cover into placeConnecting the power supply cord Connecting the AC power cordAC Outlets Switched Memory back-upSpeaker impedance setting Turning on the powerAuto Setup Introduction Optimizer microphone setupChecks and adjusts the sound level volume of each speaker Optimizer microphone positionStarting the setup AutomenuAutocheck ResultexitError Press j / i to switch between warning messages For details about each message, seeTroubleshooting for auto setup procedure Before auto setup Errors during auto setup1OUT of Phase 3LEVEL Error2OVER 24m Cause RemedyAdjust the volume to the desired output level PlaybackBasic operations Select the input sourceTo adjust the tone To listen with headphones SilentSelect a sound field program if desired CinemaSelecting sound field programs Selecting Multi CH InputFront panel operation Playing video sources BackgroundRemote control operation Enjoying multi-channel softwareAuto Auto Decoders select with jPress Select on the remote control to select the decoder When you select the SUR. Standard programWhen you select the SUR. Enhanced or Movie Theater program Enjoying 2-channel software in surroundIndicator around the front panel button lights up To cancel, press Pure Direct againThis adjusts the level of compression Listening to high fidelity stereo soundSelecting input modes Information about the input signal Press u / d to display the followingDisplaying information about the input SourceFM/AM Tuning Automatic and manual tuningPress PRESET/TUNING l / h once to begin automatic tuning Press FM/AM to select the reception bandPresetting stations Manual tuningAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsPress and hold Memory MAN’L/AUTO FM for more than 3 seconds Tune into a stationSelecting preset stations Preset numberShows the displayed station has been stored as C3 Repeat steps 1 to 5 to store other stationsExchanging preset stations Select preset station E1See Selecting preset stations Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving Radio Data System stations Changing the Radio Data System mode PTYFrequency display Lights up Remote control PTY Seek functionSelected program type appears in the front panel display To cancel this function EON functionSpecial considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesStereo MusicSpectacle Sci-FiAdventure GeneralFor music sources EntertainmentSUR. Standard SUR. EnhancedSelecting the OSD mode Using the sleep timer Advanced OperationsP04 Movie Theater Manually adjusting speaker levels Canceling the sleep timerPress j / i to adjust the speaker output level Press Enter when you have completed your adjustmentAuto Setup Manual SetupSET Menu Sound MenuSignal Info Option MenuUsing SET Menu Press u / d to select Manual SetupPress Enter to enter Manual Setup To exit, press SET Menu when finishedSound Menu 1/2 Front SPCenter SP SUR. L/R SPSUR. B L/R SP LFE/BASS OUTPresence SP 02ASUBWOOFER Phase Subwoofer phase Subwoofer PhasePriority Presence/Surround back channel priorityCSP Distance DequalizerGaudio SET Elfe LevelFdynamic Range Input Menu CMPNT-V InputOptical OUT OpticalBinput Mode Input mode Binput ModeVolume Trim Dvolume Trim Cinput RenameOption Menu Adisplay SETBmemory Guard Speaker B setting SP B CPARAM. INIDmulti Zone SET Parameter initialization CPARAM. INIAdvanced Setup Menu Advanced Setup menu is displayed in the front panel displayPress STANDBY/ON to confirm your selection Advanced Setup menu items Factory presets PresetSpeaker impedance SP IMP Remote RemoteControlling this unit Component control areaSetting remote control codes Remote Control Code Default SettingsTransmit indicator on the remote control flashes twice Controlling other components DVD playerDigital TV LD player CD player TunerSwitching library codes Clearing set up remote control codesEnter the code number System configuration and connections example ZoneZone 2 connections Remote controlling Zone Using this unit’s internal amplifierTo control Zone Press to set the remote control to Zone Second room This unitTo turn on all units the main unit and Zone 2 unit Special considerations for DTS softwareFor DVDs encoded in DTS For CDs encoded in DTSWhat is a sound field Changing parameter settings Editing Sound Field ParametersResetting parameters to the factory Presets Press u / d to selectPress j / i to change Parameter value INIT. DLY/P. INIT. DLY Initial delay Sound Field Parameter DescriptionsDSP Level DSP level Room SIZE/P. Room Size Room sizeINIT. DLY Surround initial delay SB INI. DLY Surround back initial delayLiveness Liveness Room Size Surround room sizeREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level Dimension Dimension DIALG.LIFT Dialog liftFor 2ch Stereo Direct Direct For 7ch StereoControl range 0 to Initial setting For DTS Neo6 Music Image Center imageTroubleshooting GeneralProblem Cause Remedy Refer to Sound suddenly Goes offOnly the speaker on One side can beProblem Cause Remedy Refer to Dolby Digital or DTS Or DTS indicator onVolume level Sources cannot beTuner Remote control Problem Cause Remedy Refer to Remote controlDoes not work nor Function properlyResetting the Factory Presets Glossary Audio formatsSound field programs Audio informationCinema DSP Silent CinemaVideo signal information Component video signalComposite video signal Video signalSpecifications APPENDIX-i APPENDIX-ii APPENDIX-iii APPENDIX-iv APPENDIX-v WE60030

RX-V657 specifications

The Yamaha RX-V657 is a versatile and robust AV receiver, designed to cater to both audiophiles and casual listeners alike. Released in the mid-2000s, this model quickly became popular due to its impressive feature set and solid performance, making it an excellent choice for home theater enthusiasts.

One of the standout features of the RX-V657 is its ability to deliver 6.1 channel surround sound. This receiver supports various audio formats, including Dolby Digital EX and DTS-ES, allowing it to immerse listeners in multi-dimensional soundscapes. Users can enjoy their favorite movies, music, and games with enhanced depth and clarity, ensuring an engaging audio experience.

The RX-V657 is equipped with Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts the speaker settings accordingly, optimizing the sound output based on the specific environment. This ensures that you achieve the best possible sound quality, regardless of your room's shape or furnishings.

Another notable aspect of the RX-V657 is its connectivity options. The receiver comes with multiple HDMI inputs, allowing for easy integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. It also features legacy connections like component and composite video inputs, making it compatible with older equipment as well. Additionally, the inclusion of an FM/AM tuner ensures that users can enjoy traditional radio broadcasts.

The RX-V657 includes a variety of audio processing features, such as Yamaha's cinema DSP. This technology recreates the acoustic characteristics of famous concert halls and cinema environments, enhancing the listening experience for music and movie fans alike. The receiver supports multiple sound fields, giving users the flexibility to choose the optimal setting for their content.

In terms of power, the RX-V657 delivers a solid performance with 100 watts per channel. This wattage ensures that it can drive a wide range of speakers, providing sufficient power for both small and larger home theater setups. The RX-V657 also incorporates a high dynamic power capability, which improves performance during demanding audio passages.

The design of the RX-V657 reflects Yamaha’s commitment to quality, featuring a sleek, modern aesthetic with a user-friendly front panel. The intuitive layout of controls, along with a well-organized display, enhances the overall user experience, making it easy to navigate through various settings and features.

In conclusion, the Yamaha RX-V657 is a feature-rich AV receiver that combines advanced audio technologies with practical connectivity options. It caters to the needs of both casual listeners and dedicated audio enthusiasts, making it a valuable addition to any home theater system. Its blend of performance, versatility, and ease of use positions it as a highly regarded model in Yamaha's lineup.
Top Page Image Contents