Kodak DX3600 Change to Auto flash, Ft 0.50 m between, Camera and the subject, Picture Card was

Chapter 9

Camera

Problem	Cause	Solution
Picture is too light.	The flash is not needed.	Change to Auto flash
		(page 21).
	The subject is too close	Move so there is at least 1.6
	when the flash was used.	ft (0.50 m) between the
		camera and the subject.
	The light sensor is	Hold the camera so your
	covered.	hands or other objects do
		not cover the light sensor.
Stored pictures are	The Picture Card was	Make sure the Picture Card
damaged.	removed when the	access light is not blinking
	viewfinder light was	before removing the card.
	blinking.
Pictures remaining	Picture does not take up	The camera is operating
number does not	sufficient space to	normally. Continue taking
decrease after	decrease the picture	pictures.
taking a picture.	remaining number.
Picture is not clear.	The lens is dirty.	Clean the lens (page 82).
	Subject too close when	Move so there is at least 1.6
	taking picture.	ft (0.5 m) between the
		camera and the subject.
	Subject or the camera	Hold the camera steady
	moved while the picture	while taking the picture.
	was taken.
	The subject is too far	Move so there is no more
	away for the flash to be	than 7.5 ft (2.3 m) between
	effective.	the camera and the subject.

68