Yamaha DSP-AX757SE owner manual Selecting input modes, Press Input Mode to select an input mode

Selecting input modes

This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use.

1Rotate INPUT (or press one of the input selector buttons on the remote control) to select the input source.

INPUT

or

Front panel Remote control

2Press INPUT MODE to select an input mode.

In most cases, use AUTO.

PLAYBACK

Notes

•When playing a DTS-CD/LD, be sure to set the INPUT MODE to DTS.

•If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player depending on the player.

■Displaying information about the input

source

You can display the type, format and sampling frequency of the current input signal.

1Select the input source.

INPUT MODE

or

INPUT MODE

2Press STRAIGHT.

STRAIGHT

Front panel Remote control

EFFECT

DVR/VCR2 VCR1 V-AUX DTV/CBL DVD MD/CD-R TUNER CD PHONO

	Input source	Input mode
AUTO	Automatically selects input signals in
	the following order:

	1)	Digital signals*
DTS	2)	Analog signals
	Selects only digital signals encoded in
	DTS. If no DTS signals are input, no
ANALOG	sound is output.
	Selects only analog signals. If no
	analog signals are input, no sound is
	output.

*If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate decoder.

y

You can adjust the default input mode of this unit (see page 63).

STRAIGHT

English

37