Yamaha DSP-AX757SE owner manual Zone 2 RX-V757 only, Zone 2 connections, This unit, Main room

Page 78

ZONE 2 (RX-V757 ONLY)

This unit allows you to configure a multi-room audio system. You can control this unit from the second room using the supplied remote control.

Only analog signals are sent to the second room. Any source you want to listen to in the second room must be connected using the analog (AUDIO L/R) input jacks on this unit.

Zone 2 connections

You need the following additional equipment to use the multi-room functions of this unit:

•An infrared signal receiver in the second room.

•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second room to the main room (to a CD player, for example).

•An amplifier and speakers for the second room.

y

•Since there are many possible ways to connect and use this unit in a multi-room installation, we recommend that you consult with your nearest authorized YAMAHA dealer or service center about the Zone 2 connections that best meet your requirements.

•Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown.

OUT

IN

OUT

IN

 

REMOTE

CONTROL OUT

 

 

 

 

 

 

 

 

 

 

This unit

■System configuration and connections example

DVD player

 

(or other component)

This unit

DVD INPUT

 

Infrared emitter

Main room

 

ZONE 2 OUTPUT

Amplifier

Remote control

Infrared signal

receiver

Second room

REMOTE CONTROL OUT

ZONE 2 REMOTE IN

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the volume control on the amplifier in the second room.

•To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.

76

Page 77 Page 79
Image 78
Page 77 Page 79
Contents DSP-AX757SE AV Amplifier For U.K. customers Special Instructions for U.K. ModelContents Sound field features FeaturesBuilt-in 7-channel power amplifier Other featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Slide the cover back until it snaps into placeControls and Functions Front panelStraight Effect Input ModeSpeakers A/B FM/AMRemote control Using the remote control Front panel display LFE indicator Sleep indicator96/24 indicator Input channel indicatorsRear panel AC OutletsSpeaker Setup Speaker placementSpeaker connections 10 mmRed positive + Black negative Right Left Front speakers a Subwoofer System Presence speakersRight Left CenterSurround terminals Front terminalsCenter terminals Subwoofer jackBefore connecting components ConnectionsConnecting video components Connections for DVD playbackVideo Monitor Connecting to the Multi CH Input jacks For 6-channel inputExternal decoder Use these jacks to connect any video source, such as a Connections for other video componentsVideo AUX jacks on the front panel DVD recorder Or VCRConnecting audio components Connecting a turntableConnections for audio components Surround PRE OUT jacks Connecting to an external amplifierFront PRE OUT jacks Center PRE OUT jackIndoor FM antenna IncludedAM loop antenna included Ground GND terminalAC Outlets Switched Connecting the power supply cordConnecting the AC power cord Memory back-upPress STANDBY/ON to turn off the power Speaker impedance settingTurning on the power Press Straight Effect repeatedly to select 4 ! MINChecks and adjusts the sound level volume of each speaker Auto SetupIntroduction Optimizer microphone setup Optimizer microphone positionStarting the setup AutomenuAutocheck Error If an error screen appearsResultexit Press j / i to switch between warning messages For details about each message, seeExample screen Troubleshooting for auto setup procedure Before auto setup Errors during auto setup2OVER 24m 1OUT of Phase3LEVEL Error Cause RemedyBasic operations Adjust the volume to the desired output levelPlayback Select the input sourceSelect a sound field program if desired To adjust the toneTo listen with headphones Silent CinemaFront panel operation Selecting sound field programsSelecting Multi CH Input Playing video sources BackgroundAuto Auto Remote control operationEnjoying multi-channel software Decoders select with jWhen you select the SUR. Enhanced or Movie Theater program Press Select on the remote control to select the decoderWhen you select the SUR. Standard program Enjoying 2-channel software in surroundThis adjusts the level of compression Indicator around the front panel button lights upTo cancel, press Pure Direct again Listening to high fidelity stereo soundPress Straight to select Straight Listening to unprocessed input signalsDownmixing to 2 channels Virtual Cinema DSPDisplaying information about the input Source Press Input Mode to select an input modeSelecting input modes Press StraightRate FlgPress PRESET/TUNING l / h once to begin automatic tuning FM/AM Tuning RX-V757 onlyAutomatic and manual tuning Press FM/AM to select the reception bandAutomatically presetting FM stations Presetting stationsManual tuning Hold down the button toPress and hold Memory MAN’L/AUTO FM for more than 3 seconds Manually presetting stationsAutomatic preset tuning options Tune into a stationShows the displayed station has been stored as C3 Selecting preset stationsPreset number Repeat steps 1 to 5 to store other stationsSee Selecting preset stations Exchanging preset stationsSelect preset station E1 Press and hold PRESET/TUNING Edit for more than 3 secondsReceiving Radio Data System stations Changing the Radio Data System mode PTYFrequency display Control to begin searching all preset Radio Press PRESET/TUNING l / h or PresetCH u / d on the remote control to select Desired program typeTo cancel this function EON functionSpecial considerations when recording DTS software RecordingStereo Sound Field Program DescriptionsFor movie/video sources MusicSound Field Program Descriptions SUR. Standard For music sourcesEntertainment SUR. EnhancedSelecting the OSD mode Using the sleep timer Advanced OperationsP04 Movie Theater Press Enter when you have completed your adjustment Canceling the sleep timerPress j / i to adjust the speaker output level Control range is from +10 dB to -10 dBSET Menu Auto SetupManual Setup Sound MenuSignal Info Option MenuPress Enter to enter Manual Setup Using SET MenuPress u / d to select Manual Setup To exit, press SET Menu when finishedCenter SP Sound Menu 1/2Front SP SUR. L/R SPLFE/BASS OUT SUR. B L/R SPPresence SP Cross OverPriority 02ASUBWOOFER PhaseSubwoofer phase Subwoofer Phase Presence/Surround back channel priorityCSP Distance DequalizerGaudio SET Elfe LevelFdynamic Range Optical OUT Input MenuCMPNT-V Input OpticalVolume Trim D Volume Trim Binput ModeInput mode Binput Mode Cinput RenameOption Menu Adisplay SETBmemory Guard Dmulti Zone SET Speaker B setting SP BCPARAM. INI Parameter initialization CPARAM. INIAdvanced Setup Menu Advanced Setup menu is displayed in the front panel displayPress STANDBY/ON to confirm your selection Speaker impedance SP IMP Advanced Setup menu itemsFactory presets Preset Remote RemoteControl area Remote Control FeaturesFixing the remote to AMP mode Controlling this unitSetting remote control codes Remote Control Code Default SettingsVOL Digital TV LD player CD player Controlling other componentsDVD player TunerLearn is displayed Programming codes from other remote controlsPress Learn using a ballpoint pen or similar object To 10 cmChanging source names in the display window Press RE-NAME using aPress RE-NAME again to exit from the renaming mode Object Press u / d to select and enter a characterPress Clear to exit from the clearing mode Press Clear by using a ballpoint pen or similar objectPress u / d to select the clear mode Clearing function setsClearing individual functions Clearing a learned functionZone 2 connections System configuration and connections exampleZone 2 RX-V757 only This unitTo enable Zone 2 mode on the remote Control Remote controlling ZoneUsing this unit’s internal amplifier Remote control will be able to operate this unit and ZoneSpecial considerations for DTS software Press Select k/n to exit from the Zone 2 modeTurning this unit to either on or standby For DVDs encoded in DTSWhat is a sound field Changing parameter settings Editing Sound Field ParametersPress u / d to select Press j / i to change Parameter valueDSP Level DSP level INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions Room SIZE/P. Room Size Room sizeLiveness Liveness INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Room Size Surround room sizeREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level For 2ch Stereo Direct Direct Dimension DimensionDIALG.LIFT Dialog lift For 7ch StereoControl range 0 to Initial setting For DTS Neo6 Music Image Center imageTroubleshooting GeneralOnly the speaker on Problem Cause Remedy Refer to Sound suddenlyGoes off One side can beVolume level is Problem Cause Remedy Refer to Dolby Digital or DTSOr DTS indicator on Record Volume levelTuner With the exception of U.K. model Remote control Resetting the Factory Presets Glossary Audio formatsCinema DSP Sound field programsAudio information ITU-RComposite video signal Video signal informationComponent video signal Video signalSpecifications

DSP-AX757SE specifications

The Yamaha DSP-AX757SE is a high-performance home theater receiver designed to meet the demands of audiophiles and casual listeners alike. As part of Yamaha's critically acclaimed line of audio equipment, the DSP-AX757SE combines advanced technologies with robust build quality to deliver an immersive audio experience.

At the heart of the Yamaha DSP-AX757SE is its powerful 7.1 channel amplifier. With a total output of up to 100 watts per channel, this receiver is capable of driving a wide range of speakers, making it suitable for various home theater setups. The low total harmonic distortion ensures that audio reproduction remains clear and faithful to the original source, whether you're watching a movie, listening to music, or playing video games.

One of the standout features of the DSP-AX757SE is its Digital Sound Field Processing technology. This innovative feature simulates realistic listening environments by creating sound fields inspired by actual concert halls and theaters. With presets that replicate these acoustics, users can tailor their audio experience based on the type of content they are enjoying. Furthermore, the receiver supports various surround sound formats, including Dolby Digital, DTS, and Yamaha’s proprietary Cinema DSP, allowing for an engaging multi-channel audio experience.

Connectivity options are abundant with the DSP-AX757SE. It offers multiple HDMI inputs, ensuring compatibility with modern devices such as Blu-ray players and gaming consoles. In addition to HDMI, the receiver provides inputs for digital audio, analog audio, and even phono input for vinyl enthusiasts. The inclusion of component video switching allows users to connect high-definition video sources, making it a versatile choice for a complete home theater system.

Another significant aspect of the DSP-AX757SE is its intuitive on-screen graphical interface, which simplifies navigation and configuration. Users can effortlessly adjust settings, select sound modes, and optimize speaker setups using the on-screen menus. The built-in YPAO (Yamaha Parametric room Acoustic Optimizer) feature automatically analyzes the room’s acoustic characteristics and calibrates the system accordingly, ensuring optimal sound quality.

In terms of aesthetics, the Yamaha DSP-AX757SE boasts a sleek and modern design that easily fits into any home theater environment. Its sturdy construction reflects Yamaha’s attention to detail, making it a reliable choice for long-term use.

Overall, the Yamaha DSP-AX757SE embodies a perfect blend of powerful performance, advanced technology, and user-friendly features, making it a worthy addition to any home theater setup. It caters to a wide range of audio preferences and delivers an exceptional listening experience that ensures enjoyment for years to come.
Top Page Image Contents