Yamaha DSP-AX757SE Speakers A/B, Straight Effect, Fm/Am, Program, Tone Control, Input Mode, Main

Page 7

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the PRE OUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

BSPEAKERS A/B

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

CPRESET/TUNING (EDIT) (RX-V757 only)

Switches the function of PRESET/TUNING l / h (LEVEL) between selecting preset station numbers and tuning.

DSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

EFM/AM

(RX-V757 only)

Switches the reception band when the unit is in tuner mode.

FPROGRAM

Use to select sound field programs or adjust the bass/treble balance (in conjunction with TONE CONTROL).

GTONE CONTROL

Use to adjust the bass/treble balance for the front left and right, center, presence and subwoofer channels (see page 31).

HINPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 37).

IINPUT selector

Selects the input source you want to listen to or watch.

JMULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

KPURE DIRECT

Turns on or off PURE DIRECT mode (see page 35).

CONTROLS AND FUNCTIONS

LZONE ON/OFF buttons (RX-V757 only)

MAIN

Switches this unit’s operation to control the component in the main room (see page 77).

ZONE 2

Switches this unit’s operation to control the component in the second room (Zone 2) (see page 77).

INTRODUCTION

English

5

Image 7

Contents DSP-AX757SE AV Amplifier Special Instructions for U.K. Model For U.K. customersContents Other features Features Built-in 7-channel power amplifier Sound field featuresSlide the cover back until it snaps into place Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsFM/AM Input ModeSpeakers A/B Straight EffectRemote control Using the remote control Front panel display Input channel indicators Sleep indicator96/24 indicator LFE indicatorAC Outlets Rear panelSpeaker placement Speaker Setup10 mm Speaker connectionsRed positive + Black negative Center Subwoofer System Presence speakersRight Left Right Left Front speakers aSubwoofer jack Front terminalsCenter terminals Surround terminalsConnections Before connecting componentsConnections for DVD playback Connecting video componentsVideo Monitor For 6-channel input Connecting to the Multi CH Input jacksExternal decoder DVD recorder Or VCR Connections for other video componentsVideo AUX jacks on the front panel Use these jacks to connect any video source, such as aConnecting a turntable Connecting audio componentsConnections for audio components Center PRE OUT jack Connecting to an external amplifierFront PRE OUT jacks Surround PRE OUT jacksGround GND terminal Indoor FM antenna IncludedAM loop antenna includedMemory back-up Connecting the power supply cordConnecting the AC power cord AC Outlets SwitchedPress Straight Effect repeatedly to select 4 ! MIN Speaker impedance settingTurning on the power Press STANDBY/ON to turn off the powerOptimizer microphone position Auto SetupIntroduction Optimizer microphone setup Checks and adjusts the sound level volume of each speakerAutomenu Starting the setupAutocheck If an error screen appears ErrorResultexit For details about each message, see Press j / i to switch between warning messagesExample screen Errors during auto setup Troubleshooting for auto setup procedure Before auto setupCause Remedy 1OUT of Phase3LEVEL Error 2OVER 24mSelect the input source Adjust the volume to the desired output levelPlayback Basic operationsSilent Cinema To adjust the toneTo listen with headphones Select a sound field program if desiredPlaying video sources Background Selecting sound field programsSelecting Multi CH Input Front panel operationDecoders select with j Remote control operationEnjoying multi-channel software Auto AutoEnjoying 2-channel software in surround Press Select on the remote control to select the decoderWhen you select the SUR. Standard program When you select the SUR. Enhanced or Movie Theater programListening to high fidelity stereo sound Indicator around the front panel button lights upTo cancel, press Pure Direct again This adjusts the level of compressionVirtual Cinema DSP Listening to unprocessed input signalsDownmixing to 2 channels Press Straight to select StraightPress Straight Press Input Mode to select an input modeSelecting input modes Displaying information about the input SourceFlg RatePress FM/AM to select the reception band FM/AM Tuning RX-V757 onlyAutomatic and manual tuning Press PRESET/TUNING l / h once to begin automatic tuningHold down the button to Presetting stationsManual tuning Automatically presetting FM stationsTune into a station Manually presetting stationsAutomatic preset tuning options Press and hold Memory MAN’L/AUTO FM for more than 3 secondsRepeat steps 1 to 5 to store other stations Selecting preset stationsPreset number Shows the displayed station has been stored as C3Press and hold PRESET/TUNING Edit for more than 3 seconds Exchanging preset stationsSelect preset station E1 See Selecting preset stationsReceiving Radio Data System stations PTY Changing the Radio Data System modeFrequency display Desired program type Press PRESET/TUNING l / h or PresetCH u / d on the remote control to select Control to begin searching all preset RadioEON function To cancel this functionRecording Special considerations when recording DTS softwareMusic Sound Field Program DescriptionsFor movie/video sources StereoSound Field Program Descriptions SUR. Enhanced For music sourcesEntertainment SUR. StandardAdvanced Operations Selecting the OSD mode Using the sleep timerP04 Movie Theater Control range is from +10 dB to -10 dB Canceling the sleep timerPress j / i to adjust the speaker output level Press Enter when you have completed your adjustmentSound Menu Auto SetupManual Setup SET MenuOption Menu Signal InfoTo exit, press SET Menu when finished Using SET MenuPress u / d to select Manual Setup Press Enter to enter Manual SetupSUR. L/R SP Sound Menu 1/2Front SP Center SPCross Over SUR. B L/R SPPresence SP LFE/BASS OUTPresence/Surround back channel priority 02ASUBWOOFER PhaseSubwoofer phase Subwoofer Phase PriorityDequalizer CSP DistanceElfe Level Gaudio SETFdynamic Range Optical Input MenuCMPNT-V Input Optical OUTCinput Rename Binput ModeInput mode Binput Mode Volume Trim D Volume TrimAdisplay SET Option MenuBmemory Guard Parameter initialization CPARAM. INI Speaker B setting SP BCPARAM. INI Dmulti Zone SETAdvanced Setup menu is displayed in the front panel display Advanced Setup MenuPress STANDBY/ON to confirm your selection Remote Remote Advanced Setup menu itemsFactory presets Preset Speaker impedance SP IMPControlling this unit Remote Control FeaturesFixing the remote to AMP mode Control areaRemote Control Code Default Settings Setting remote control codesVOL Tuner Controlling other componentsDVD player Digital TV LD player CD playerTo 10 cm Programming codes from other remote controlsPress Learn using a ballpoint pen or similar object Learn is displayedObject Press u / d to select and enter a character Press RE-NAME using aPress RE-NAME again to exit from the renaming mode Changing source names in the display windowClearing function sets Press Clear by using a ballpoint pen or similar objectPress u / d to select the clear mode Press Clear to exit from the clearing modeClearing a learned function Clearing individual functionsThis unit System configuration and connections exampleZone 2 RX-V757 only Zone 2 connectionsRemote control will be able to operate this unit and Zone Remote controlling ZoneUsing this unit’s internal amplifier To enable Zone 2 mode on the remote ControlFor DVDs encoded in DTS Press Select k/n to exit from the Zone 2 modeTurning this unit to either on or standby Special considerations for DTS softwareEditing Sound Field Parameters What is a sound field Changing parameter settingsPress j / i to change Parameter value Press u / d to selectRoom SIZE/P. Room Size Room size INIT. DLY/P. INIT. DLY Initial delaySound Field Parameter Descriptions DSP Level DSP levelRoom Size Surround room size INIT. DLY Surround initial delaySB INI. DLY Surround back initial delay Liveness LivenessREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For 7ch Stereo Dimension DimensionDIALG.LIFT Dialog lift For 2ch Stereo Direct DirectFor DTS Neo6 Music Image Center image Control range 0 to Initial settingGeneral TroubleshootingOne side can be Problem Cause Remedy Refer to Sound suddenlyGoes off Only the speaker onRecord Volume level Problem Cause Remedy Refer to Dolby Digital or DTSOr DTS indicator on Volume level isTuner With the exception of U.K. model Remote control Resetting the Factory Presets Audio formats GlossaryITU-R Sound field programsAudio information Cinema DSPVideo signal Video signal informationComponent video signal Composite video signalSpecifications