VOICE MEMO
Voice memo allows a five or fifteen second audio track to be recorded with a still image. The function is activated and the length of the recording time is set on the
DATE IMPRINTING |
|
The date of recording can be printed directly on the image. |
|
The imprinting function must be activated before the image is |
|
taken. Once activated, the date will continue to be imprinted |
|
until the function is reset; a yellow bar is displayed behind the |
|
frame counter on the monitor to indicate date imprinting is |
|
active. | |
|
After an image is captured, a screen will appear indicating the audio recording has started. A bar graph (1) will display the amount of recorded time remaining. The recording will automatically stop when the set time has elapsed. To cancel the recording and erase the audio track, press the down key of the controller (2) or the
The voice memo is attached to the last frame in a
Microphone
Auto
1
Recording audio
: Stop
3
2
Camera Notes
Date imprinting is activated with a menu; see navigating the
The date is imprinted in the lower right corner of the image when viewed horizontally. It is printed directly on the photograph writing over the image information. The date can be imprinted in three formats: year/month/day, month/day/year, and day/month/year. The date and date format are set in the custom 2 section of the
displayed with them.
Every time a still image is recorded, it is stored with an exif tag that contains the date and time of recording as well as shooting information. This information can be viewed with the camera in
Recording Tips
When making audio recordings, be careful not to touch or cover the microphone. The quality of the recording is proportional to the subject to microphone distance. For best results, hold the cam- era approximately 20cm (8in) from your mouth.
the playback or Quick View mode, or on a computer with the DiMAGE Viewer software.
46 
47