Konica Minolta S414 instruction manual LCD Monitor Care

Page 55

LCD MONITOR CARE

Although the LCD monitor is manufactured using high precision technology, there may occasionally be a lack of color or bright points on the LCD monitor.

Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.

In a cold environment, the LCD monitor may become temporarily dark. When the camera warms up, the display will function normally.

The LCD monitor may be slow to react in low temperatures or may turn dark in a hot environment. When the camera reaches normal operating temperature, the display will function normally.

If fingerprints are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth.

OPERATING TEMPERATURES AND CONDITIONS

This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).

Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to extreme humidity.

When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to prevent condensation from forming. Allow the camera to come to room temperature before removing it from the bag.

BEFORE IMPORTANT EVENTS OR JOURNEYS

Check the camera’s operation; take test pictures and purchase spare batteries.

Minolta has no responsibility for any damage or loss incurred by equipment malfunction.

COPYRIGHT

TV program, films, video tapes, photographs, and other materials may be copyrighted. Unauthorized recording or duplication of such material may be contrary to copyright laws. Taking pictures or images of performances, exhibitions, etc., is prohibited without approval and can infringe on copyright. Images protected by copyright can only be used under the provisions within the copyright laws.

BATTERIES

Battery performance decreases with temperature. In cold environments, we recommend keeping spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power when they warm up. As the performance of Ni-MH

batteries are less affected by temperature, their use is recommended when shooting in cold environments.

•Remove the batteries when the camera is not in use for an extended period. Leaking battery fluid may damage the battery-chamber.

Occasionally, when using alkaline batteries, the battery-condition indicator will give a false low-battery-power warning, even though there is enough power capacity. Continue to use the camera; the low-battery indicator will disappear.

If batteries have been exhausted when used in the camera, do not reload them even if their charge seems to recover over time. These batteries will interfere with normal camera operation.

COMPACTFLASH CARD CARE AND HANDLING

CompactFlash Cards are manufactured with precision electronic components. The fol- lowing may cause data loss or damage:

Improper use of the card.

Bending, dropping, or subjecting the card to impact.

Heat, moisture, and direct sunlight.

Static electrical discharge or electromagnetic fields near the card.

Removing the card or interrupting the power supply while the camera or a computer is accessing the card (reading, writing, formatting, etc.).

Touching the electrical contacts of the card with your fingers or metal objects.

Using the card beyond its life. Purchasing a new card periodically may be necessary.

Minolta has no responsibility for any loss or damage to data. It is recommended that a copy of the card data be made.

QUESTIONS AND SERVICE

If you have questions about your camera, contact your local camera dealer or write to the Minolta distributor in your area.

Before shipping your camera for repair, contact a Minolta Service Facility.

108 APPENDIX 109

Image 55
Contents Page For Proper and Safe USE Before YOU BeginExplosion or fire Table of Contents 100 Camera Body Viewfinder Mode DialAttaching the Neck Strap and Lens CAP LCD Monitor DisplayAuto Power Save Battery Condition IndicatorChanging Batteries Changing the Compactflash Card External Power Supplies Sold SeparatelyController Setting the Date and TimeSetting the Camera to Record Images Automatically AUTO-RECORDING ModeHandling the Camera Using the Zoom LensBasic Recording Operation Focus Range Focus SignalsSpecial Focusing Situations Focus LockDIGITAL-SUBJECT-PROGRAM Button Flash Signals Flash Modes Flash Range AUTO-RECORDING ModeCAMERA-SHAKE Warning Drive Modes SELF-TIMERN g l e f r a m e advance Continuous Advance Remote Control Sold SeparatelySize 2272 X 1600 X 1280 X 640 X Fine Standard Economy Bracketing Display Button Recording ModeViewing and Deleting Images SINGLE-FRAME Playback and Histogram DisplayEnlarged Playback Display Button PlaybackBasic Navigating the AUTO-RECORDING Mode MenuImage Size and Image Quality Date Imprinting Voice MemoTo delete an image Digital ZoomInstant Playback To store an image during playbackExposure Compensation What is AN EV? What is a STOP?Stops As much light Autofocus Areas and Control MULTI-FUNCTION Recording ModeCustom Navigating the MULTI-FUNCTION Recording Mode MenuManual exposure M Exposure ModesProgram Aperture priority aFocus Modes Bulb ExposuresAutomatic White Balance Preset White BalanceWhite Balance Custom White BalanceMetering Modes Camera Sensitivity ISOFlash Range and Camera Sensitivity FULL-TIME AFFilter Color ModeSharpness ContrastShort Guide to Photography Movie Recording Recording Movies with the IR Remote Control RC-3Playing Back Voice Memos Viewing MoviesNavigating the PLAYBACK-MODE Menu Viewing Images on a Television FRAME-SELECTION ScreenPlay Mark frames Select Confirm Enter Locking Files Deleting FilesChanging the Index Playback Format Slide Enter show All frames Playback Marked Frames Slide ShowDuration 1 60s Repeat Yes / No Ordering AN Index Print Canceling a Dpof Print OrderAbout Dpof Creating a Dpof Print OrderCopying Images Navigating the Setup Menu Setup ModeLanguage Display ModeLCD Monitor Brightness Formatting Compactflash CardsSelect Folder Audio SignalsVolume File Number # MemoryVideo Output Resetting the CameraDate and Time Setting Date FormatSystem Requirements Connecting the Camera to a ComputerAutomatic Installation Connecting to Windows 98 and 98 Second EditionManual Installation Compactflash Card Folder Organization Drive IconMacintosh Disconnecting the Camera from the ComputerWindows 98 / 98 Second Edition Windows Me, 2000 Professional, and XPAuto Power Save DATA-TRANSFER Mode TroubleshootingWindows 98 and 98 Second Edition About NI-MH Batteries Problem Symptom Cause Solution Problem SymptomCauseCare and Storage Removing the Driver Software WindowsLCD Monitor Care CCD Technical SpecificationsMinolta Hong Kong Limited Universal Copyright ConventionAbout NI-MH Batteries OM NI-MH-BATTERIER