Basic Operation, Muting the TSS-15

Basic Operation

This section explains the basic operation.

■Adjusting the Level of the Subwoofer,

Center, or Surround Speakers

TSS-15

Remote control

While listening to a sound source, use the SP LEVEL Up

MODE

STANDBY/ON

[+] and Down [–] buttons to adjust the level of the sub-

NATURAL SOUND HOME THEATER SYSTEM							TSS-15
			MAIN	qPro Logic
AAC	DTS	qDigital /SUB		MOVIE		MUSIC	AUTO
1	2	3	4	5		6	7
-6	-4	-2	0	+2		+4	+6
					INPUT
			1	2		3	4

NIGHT

MOVIE MUSIC SPORTS GAME

MODE INPUT

STANDBY/ON

VOLUME

INPUT

MOVIE

MUSIC

SPORTS

GAME

VOLUME

MUTE

SP LEVEL

NIGHT

CENTER

SURR

TEST

STANDBY/ON

DUAL MONO

SP LEVEL

INPUT

woofer (SW), center speaker (CENTER), or surround

speakers (SURR).

Notes:

•The TSS-15 supports Dolby Digital, DTS, and AAC (general model only) digital audio with a sampling rate of 48 kHz or less, and PCM audio up to 96 kHz.

•The Cinema DSP and Dolby Pro Logic II listening modes cannot be used with 96 kHz PCM audio.

•The subwoofer, center, and surround speaker levels can- not be adjusted while a pair of headphones is connected.

■Muting the TSS-15

TSS-15 WD76700

SILENT CINEMA

■Listening to a Sound Source

To temporarily mute the TSS-15, press the remote control’s [MUTE] button. The volume level indicators ﬂash on the TSS-15. To unmute the TSS-15, press the [MUTE] button again. If you adjust the volume while the TSS-15 is muted, or press any other button, it will be unmuted automatically.

1 To turn on the TSS-15, press the [STANDBY/ON] button.

MODE

STANDBY/ON

The STANDBY/ON button on the TSS-15 lights up.

2 Turn on the source component.

3 Use the remote control’s INPUT buttons, or the TSS-15’s [INPUT] button to select the input to which the component is connected.

MOVIE MUSIC SPORTS GAME

VOLUME

MUTE

SP LEVEL

NIGHT

SW CENTER SURR TEST

Press the [MUTE] button to mute the TSS-15

The INPUT indicator for the selected input lights up.

4 Start playback on the component.

See the component’s instruction manual for details.

5 Use the remote control’s VOLUME Up [+] and

Down [–] buttons, or the TSS-15’s VOLUME control to adjust the volume.

While it’s being adjusted, the volume level is shown by the TSS-15’s volume indicators for several seconds.

■Turning Off the TSS-15

To turn off the TSS-15, press the [STANBY/ON] button on the remote control or TSS-15 to set it to Standby.

While on Standby, the TSS-15 consumes a small amount of power so that it’s able to receive commands from the remote control.

Note:

The next time you turn on the TSS-15, the previously selected input (1–4) and listening mode will be selected automatically.