Getting to Know the TSS-15, Front Panel

Getting to Know the TSS-15

English

■Front Panel

NATURAL SOUND HOME THEATER SYSTEM TSS-15

			MAIN	qPro Logic			1
AAC	DTS	qDigital /SUB		MOVIE	MUSIC	AUTO
1	2	3	4	5	6	7
-6	-4	-2	0	+2	+4	+6

		INPUT			2
	1	2	3	4
				NIGHT	3
MOVIE	MUSIC	SPORTS		GAME	4

MODE INPUT

STANDBY/ON

VOLUME

SILENT CINEMA

(general model)

1Status, volume & level indicators

Status indicators

			MAIN	qPro Logic
AAC	DTS	qDigital /SUB		MOVIE	MUSIC	AUTO
1	2	3	4	5	6	7
-6	-4	-2	0	+2	+4	+6

Volume and level indicators

These are multipurpose indicators. Normally, they work as status indicators, indicating input signal format (Dolby Digital, DTS, etc) or Pro Logic II listening mode. When the VOLUME control is adjusted, they indicate the volume level setting from 1 through 7. After several seconds, they revert to status indicators,

and work as explained below. They’re also used when adjusting individual speaker levels with the test tone (–6, –4, –2, 0, +2, +4, +6).

•AAC indicator (general model only)

This indicator lights up when an AAC signal is input.

•DTS indicator

This indicator lights up when a DTS signal is input.

•Dolby Digital indicator

This indicator lights up when a Dolby Digital signal is input.

•MAIN/SUB indicator

When listening to a multilingual TV program, this indicator lights up green when the main language is selected, and lights up red when the sub-language is selected. Main and sub are selected by using the remote control’s [DUAL MONO] button.

•MOVIE indicator

This indicator lights up when the Dolby Pro Logic II Movie listening mode is selected.

•MUSIC indicator

This indicator lights up when the Dolby Pro Logic II Music listening mode is selected.

•AUTO indicator

This indicator lights up when the Auto listening mode is selected.

2INPUT 1–4 indicators

These indicators show which input is currently selected.

3NIGHT indicator

This indicator lights up when the Night listening mode is selected (see page 15).

4MOVIE, MUSIC, SPORTS & GAME buttons

These buttons are used to select the Movie, Music, Sports, and Game Cinema DSP listening modes. The button for the selected mode lights up (see page 14).

5MODE button

This button is used to select the following listening modes: Dolby Pro Logic II Movie, Dolby Pro Logic II Music, or Auto (see page 15). It can also be used to cancel the Cinema DSP listening modes.

6INPUT button

This button is used to select inputs 1 through 4 (see page 12).

7STANDBY/ON button

This button is used to set the TSS-15 to On or Standby (see page 12).

Note:

While on Standby, the TSS-15 consumes a small amount of power so that it’s able to receive commands from the remote control.