For U.K. customers | Yamaha TSS-15 specification

CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.

1To assure the ﬁnest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place with at least 20 cm on top, 10 cm on the left and right, and 10 cm at the back of the ampliﬁer unit — and away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

3Locate this system away from other electrical appliances, motors, or transformers to avoid humming sounds. To prevent ﬁre or electrical shock, do not place this system where it may be exposed to dripping or splashing, and never put any objects ﬁlled with liquids, such as vases, on top of the system.

4Do not expose this system to sudden temperature changes from cold to hot. Do not locate this system in an environment with high humidity (i.e., a room with a humidiﬁer) to prevent condensation inside this system, which may cause electrical shock, ﬁre, damage to this system, and/or personal injury.

5Avoid installing this system in a place where foreign objects or liquid might fall. Otherwise, ﬁre, damage to the system, and/or personal injury may result. Do not place the following objects on this system:

–Other components, as they may cause damage and/or discoloration of the surface of the system.

–Burning objects (i.e., candles) as they may cause ﬁre, damage to the system, and/or personal injury.

–Containers of liquid, as they may leak or spill and cause electrical shock to the user and/or damage to this system.

6Do not cover this system with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this system rises, it may result in ﬁre, damage to the system, and/or personal injury.

7Do not plug this system into a wall outlet until all connections are complete.

8Do not operate this system upside-down. It may overheat, possibly causing damage.

9Do not use excessive force on switches, knobs, and/or cables.

10When disconnecting the power cable from a wall outlet, grasp the plug; do not pull the cable.

11Do not clean this system with chemical solvents; they might damage the ﬁnish. Use a clean, dry cloth.

12Only the voltage speciﬁed on this system may be used. Using this system with a voltage higher than speciﬁed is dangerous and may cause ﬁre, damage to the system, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this system with a voltage other than speciﬁed.

13To prevent damage by lightning, disconnect the power cable from the wall outlet during an electrical storm.

14Take care of this system to prevent foreign objects and/or liquid drops from entering the system.

15When using a humidiﬁer, avoid condensation inside the system by allowing sufﬁcient space around the system. Avoid excess humidiﬁcation. Condensation might cause a ﬁre, damage to the system, and/or electric shock.

16Do not attempt to modify or ﬁx this system. Contact qualiﬁed YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason.

17When not planning to use this system for a long period of time (i.e., vacation), disconnect the AC power plug from the wall outlet.

18Be sure to read the “Troubleshooting” section for information on common operating errors before concluding that this system is faulty.

19Before moving this system, press STANDBY/ON to place the system in standby mode, and disconnect the AC power plug from the wall outlet.

20Be sure to only use the AC adaptor (LSE9802B1540) included with this system. Otherwise, you might cause a ﬁre or damage to this system.

•This system is not fully disconnected from the AC power source as long as it is connected to a wall outlet, even if the system is turned off. This state is called Standby mode. In Standby mode, the system consumes a very small amount of power.

•Do not install the system in a horizontal orientation as this may cause damage or malfunction.

•This system is designed for use in a home. Do not attempt to install it in an automobile. Doing so may cause damage or malfunction.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

■For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, the plug should be removed and an appropriate 3-pin plug ﬁtted. For details, refer to the instructions below.

Note

A plug severed from the mains lead must be destroyed, as a plug with bared ﬂexible cord is hazardous if engaged in a live socket outlet.

■Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured BLUE must be connected to the terminal that is marked with the letter N or coloured BLACK. The wire that is coloured BROWN must be connected to the terminal that is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three-pin plug.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.