Yamaha TSS-15 owner manual Package Contents, Fitting the Stand

Package Contents

Make sure that you have all the items shown here.

TSS-15 amplifier							Subwoofer
NATURAL SOUND HOME THEATER SYSTEM						TSS-15
			MAIN	qPro Logic
AAC	DTS	qDigital /SUB		MOVIE	MUSIC AUTO
1	2	3	4	5	6	7
-6	-4	-2	0	+2	+4	+6
				INPUT
			1	2	3	4
						NIGHT
MOVIE		MUSIC	SPORTS		GAME
			MODE		INPUT
					STANDBY/ON
		VOLUME
							Remote control
							MODE			STANDBY/ON
							MOVIE MUSIC		SPORTS GAME
								VOLUME
					SILENT CINEMA			MUTE
								SP LEVEL		NIGHT
							SW	CENTER	SURR	TEST
										DUAL MONO
							1	2	3	4
								INPUT

Satellite speakers

(Front L/R and center speakers have 3 meter cords,

surround L/R speakers have 10 meter cords.)

AC adaptor	Power cable
(LSE9802B1540)

Optical cable Audio pin cable

Stand

TSS-15 WD76700

Screws

Fastener Non-skid pads

Preparing the Remote Control Fitting the Stand

The remote control comes with the battery already installed. Before using the remote control for the very first time, pull out the plastic tab, as shown.

Before using the TSS-15 amplifier for the very first time, you must fit the stand for stability. Do not use the amplifier horizontally. Put the stand onto the base of the amplifier, and with a Phillips screwdriver, screw it to the amplifier with the two screws provided, as shown.

Plastic tab

For information on replacing the battery, see page 18.

non-skid pads

Affix four non-skid pads onto the base of the stand to pre- vent it from slipping.

2